Showing 440–450 of 1454 results

The Black Box VX-HDB2-RX is a high-definition video extender receiver designed to work with CATx (Cat 5e, Cat 6, etc.) cables. Supporting HDR (High Dynamic Range) video, this receiver ensures crisp, clear, and vibrant video signals over extended distances, making it ideal for applications in digital signage, conferencing, and security monitoring. The VX-HDB2-RX allows the receiver to decode high-quality 4K video signals, making it an excellent choice for industries that require high-resolution video output.

DVI Recorder | USB 3.0 | USB-A Cable Included | For Windows® and MacThis DVI to USB-C™ video capture device works as an external USB capture card to record high-definition DVI video to your USB-C, USB-A or Thunderbolt 3 computer. With an aluminum enclosure, this device is built strong for fixed-location or on-the-go capture. It offers a separate 3.5 mm audio input for accompanying audio or voice-overs, and a DVI} pass-through port for connecting a monitor to review the video as it’s captured.Easy Video Recording on Windows and MacThe included software makes USB-C DVI capture easy by turning your computer into a DVI recorder. Using a widely adopted codec, videos saved in StreamCatcher™ work with almost any video player and require no converting or editing.On Windows, you can live broadcast your video over the internet, using Twitch™ or other third-party video streaming platforms, with the included software.Capture HD Video at 1080p 60fpsWith this DVI to USB video capture device, you can record meetings, presentations, conference calls and security footage, saving 1080p HD video at 60fps directly to your computer for easy editing and sharing.DirectShow Compatibility on WindowsWith this DVI to USB 3.0 video capture device, you can record raw/lossless video using any third-party DirectShow™ compatible software, such as Open Broadcaster Software (OBS).The StarTech.com Advantage

3 Port Mini DP 1.2 to Displayport Multi-Stream (MST) Hub 4K x 2K

ATEN VS0801H. Video port type: HDMI, Video in: 8 x HDMI Type A Female (Black), Video out: 1 x HDMI Type A Female (Black). Material: Metal, Product color: Black, Silver, Maximum refresh rate: 60 Hz. Power consumption (typical): 3.71 W. Width: 17.2" (437 mm), Depth: 6.29" (159.8 mm), Height: 1.73" (44 mm)

The VE882 is an Optical HDMI Extender that overcomes the length restriction of standard HDMI cables by using optical fiber to send high definition audio and video signals over large distances.The VE882 accepts an audio-video stream from a local source and serializes the data to pass it over a single 3.125 Gbps optical link (for resolutions up to 1080p@60Hz at 24-bits). The VE882 can also extend the IR remote control and transfer RS-232 (up to 115kbps) in both directions, allows you to connect serial devices such as touch screens and barcode scanners.

The VC182 VGA to HDMI converter with Scaler offers an easy and convenient way of converting VGA input signals into digital video (HDMI). The VC182 carries a high-performing scaling engine that converts the video resolution to give you the best image quality.

Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 CablingConverts audio/video to an IP-based signal that is transmitted point-to-point to a display 328 ft. awayAdd low-cost network switches between transmitter and receiver to continue extending distance up to 328 ft. per switchHDMI output for connecting a local displayCreate a Multi-In, Multi-Out Installation Using B160-Series Transmitters and ReceiversConnect up to 64 transmitters and 255 receivers through multiple dedicated managed network switchesIGMP-enabled switches allow centralized control over which sources show on which displaysVideo source can be sent to any analog or digital display, so you can mix and match technologies and use existing monitorsEnhanced Technical FeaturesSupports video resolutions up to 1920 x 1080 (1080p)Uses H.264 video compression standardTransmits on 20–60 kHz IR frequencyExtends IR control signals that control a source from a remote displaySupports RS-232 serial baud rates up to 57600 BpsHDCP and 3D compatible when used with a DisplayPort or HDMI receiverPlug-and-Play FunctionalityNo software or drivers requiredHardware included for mounting on wall, rack or poleCompatible with all B160-Series A/V over IP receiversTAA-CompliantCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases