Showing 800–810 of 819 results

APC AR3380B2 NetShelter AV Enclosures NetShelter SX Gen 2 rack 1991H x 800W x 1200D mm with sides 42U

NetShelter CX 24U Secure Soundproof Server Room in a Box EnclosureSpecialized enclosures with integrated cooling, noise dampening, and power distribution for server and network applications in office environments.Includes : Casters , Key(s) , Leveling feet , Rack Power Distribution Unit (PDU) , Side panels , Unpacking sheet- Acoustic foam lining for noise dampeningSuperior noise reduction of installed IT equipment allowing the enclosure to be placed in a quiet environment.- Adjustable equipment mounting railsThe equipment mounting rails, front and rear, are fully adjustable for various mounting depths, for rear-facing equipment mounting or additional clearance from the front door. Maximum rack depth 88 cm/34.6 in. Minimum rack depth 12 cm/4.7 in.- Dedicated rear cable access pointThe cable port has a capacity of up to 400 cables and is situated perfectly for ground or under-floor cabling.- Integrated heat removalHigh efficiency fan modules remove heat and eliminate the need to purchase a costly cooling unit for your IT equipment.- Integrated power distributionProvided with a rack power distribution unit servers and other equipment are ready for deployment.- Light oak veneer finishThe enclosure blends discretely into almost any office environment.- Removable side panelsProvides customers with easy accessibility to equipment.- Six vertical 0U accessory channelsProvides multiple mounting locations for cable management accessories and rack PDUs without using critical equipment space.Agility- Acoustic foam lining for noise dampeningSuperior noise reduction of installed IT equipment allowing the enclosure to be placed in a quiet environment.- Light oak veneer finishThe enclosure blends discretely into almost any office environment.- Lockable front doorsProtect IT equipment from unwanted access- Toolless Rack Mounting CapabilitiesServer cases do not require additional tools to mount into NetShelter Enclosures, which allows the users to quickly and easily mount units in the rear of the enclosure.- Plug and Play setupFast and Easy set up

NetShelter CX Mini Enclosure Black FinishNetshelter CX Mini is specifically designed to house a complete small-office IT installation comprised of one or two servers, network hardware and peripheral devices. It combines extreme noise reduction and moderate thermal capacity with exceptional reliability and an all-inclusive, plug-and-play specification. Designed to accept tower form factor servers, the CX Mini can also be converted to accept rack form factor servers using a 12U rack mount conversion kit (AR4000MV12U). The resulting EIA rack is 600 mm/23.6" deep.

Rack components that can be added to existing racks if requirements change.

Active Airflow ControlMonitors and actively adjust cooling unit airflow in containment systems, while providing visibility to effective cooling to critical IT equipment.Active response controlMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and status of the unit is provided.Air filtrationRemoves dirt and other particulates from the intake air for cleaner supply air.Architecturally neutralUnobtrusive design and coloring, blends in with the surroundings.Capacity ControlCooling system will operate from 0 - 100% of the rated capacity to maintain rack inlet temperatures and reduce operational costs at varying heat loads.CastersProvides flexibility to move the unit to wherever cooling is required.Containment system compatibleThe unit can be combined with a Rack or Hot Aisle Containment System to eliminate hot air mixing and maximize cooling efficiencyContinuous current monitoringPermits a continuous monitoring of the compressor’s absorbed current to signal possible discrepancies with the default values (Optional).Direct drive motorsStress on bearings is nearly eliminated, increasing useful life. Allows integral fan/motor assembly to be factory balanced, which lowers vibration and expedites startup.Ease of UseSimplifies future planning by allowing side to side equipment to be placed anywhere in the data center.Easy to installInnovative design allows for fast, easy installation by almost anybody.EfficiencyIncreases the capacity of the air conditioner by supplying a warmer return air temperature.Electronic expansion valveRefrigerant flow optimization at any load and temperature conditions. Continuous indirect refrigerant charge monitoringElectronically Commutated FansProvide the highest efficiency and reduce total power consumption by matching the airflow requirements to the heat load of the data center.Enclosure system compatibleSpecifically designed to work with Netshelter Enclosures.Fan guardsA safety measure that provides protection from the fan opening by covering the inlet.Fault-tolerant fan systemIn the event of a fan failure, the remaining fan(s) will continue to operate.Field replaceable componentsFans and electronics module can be readily replaced without uninstalling the unit.FlexibilitySupport for varying aisle widths, rack heights, rack depths, and single rows. Supports hot and cold aisle containmentFront service accessThe system has full service, front access for routine servicing of components. Front access also narrows the footprint of the system making it possible for units to be placed side by side.Green RefrigerantEnvironmentally friendly refrigerant that can offer LEED points.Hardwire capableFor installations where hard wiring is required or prefered.Head pressure controlModulates refrigerant head pressure to protect from coil freeze.High Sensible-to-Total Cooling RatioAchieved by careful sizing of heat exchanger coils.Horizontal airflow patternRemoves heat close to the source of generation in the hot aisle and distributes cold air to the front of the racks in the cold aisle.Increased capacityHigher rate of heat removal allows more equipment to be installed in each rack.Local area networkCreates a shared control between all the available resources for maximum energy efficiency and controlled management of the group during emergency situationsMinimizes Air MixingDelivers cool, conditioned air directly to the inlet of IT equipment.Modular strategyModular design of the mechanical and control systems allow for gradual build-up of the cooling infrastructure to match the cooling demand of the facility. This greatly reduces CAPEX expeditures and provides deferred investment throughout the life of the facility.Network interfaceProvides management by connecting the device directly to the network with a dedicated IP address, avoiding the need for a proxy such as a server. Management is available via Web browser, Telnet or SSH. Notification features inform you of problems as they occur.Operational efficiencyWarmer entering air temperatures reduce both the required amount of humidification and the demand for costly reheat.Predictable coolingPlacing the unit in the row of racks moves the source of cooling closer to the heat load. This eliminates air mixing and provides a predictable cooling architecture.Predictive failure notificationMaximizes system availability by providing early warning of required fan or filter replacement.Programmable input/output contactsAllows device contacts to be connected to the air conditioner and mapped to customer outputs or system alarms.Rack Inlet Temperature ControlReduces the risk of hot spots at the rack levelReal-Time Capacity MonitoringReal-time display of current and available cooling.Rear containmentEnsures server exhaust air is returned to the InRow cooling units for maximum cooling predictability.Row-based architectureCaptures hot exhaust air directly from the IT equipment, thereby increasing the unit's sensible cooling capacity over traditional cooling architectures.Scalable DesignModular design provides scalable solutions to add cooling as demand increases.Small FootprintEfficient use of space with a small footprint provides the ability for the unit to be placed in a corner or even installed into a partitioned space.Temperature DisplayMonitors and displays temperature to prevent overheating.Touch-screen GUIEnables easy configuration, full monitoring, and event logging

Direct drive motorsStress on bearings is nearly eliminated, increasing useful life. Allows integral fan/motor assembly to be factory balanced, which lowers vibration and expedites startup.ServiceabilityEasy service accessAllows for all serviceable components to be replaced/maintained by easily accessible panels/doors.AgilityScaleable densitiesAllows for higher densities to be achieved by integrating containment with room, row and rack cooling system architectures.Modular designModular design provides scalable solutions to add cooling as demand increases.Total Cost of OwnershipVariable speed fansVariable speed fans reduce energy consumption during off-peak cooling periods.In-Row architectureCaptures hot exhaust air directly from the IT equipment, thereby increasing the unit's sensible cooling capacity over traditional cooling architectures.AvailabilityRack inlet temperature controlReduces the risk of hot spots at the rack levelActive response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Predictable coolingPlacing the unit in the row of racks moves the source of cooling closer to the heat load. This eliminates air mixing and provides a predictable cooling architecture.ManageabilityBuilding management system integrationSend alarms and data points allowing you to manage critical building infrastructure from a single system.Real-Time capacity monitoringReal-time display of current and available cooling.Microprocessor controllerUtilizes intelligent, active response control, and real-time monitoring. The system is controlled by a microprocessor providing high level control functionality and human interface via a four line, eighty character, alphanumeric display

Wide enclosure with increased cable management options for high density server and networking applications. 42U height to easily roll through doorways. Additional shock packaging for shipping equipment weighing up to 1250lbs/568kg.CompatibilityIntegrated with APC InfraStruXure productsAPC cooling, power distribution, and cable management products work seamlessly with the enclosures to provide a complete IT infrastructure support system.Guaranteed compatibilityVendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The APC "Fits Like a Glove" money back guarantee provides peace of mind that all of your EIA-310-D compliant rack-mount equipment will physically fit in a NetShelter SX enclosure.ConvenienceCable AccessLarge cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor.Simple SelectionNo need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. APC has made it easy by handling the details and providing complete enclosures with single part numbers.VentilatedPerforated front and rear doors provide ample ventilation for servers and networking equipment.Quick release doorsFront door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design.Half-height side panelsHalf-height quick release side panels reduce size and weight for easy handling and access to equipment. Side panels are lockable utilizing a single key with the doors.

Rack enclosures with advanced cooling, power distribution, and cable management for server and networking applications in IT environments. Includes: Casters, Doors, Ground Studs, Installation Guide, Leveling feet, Mounting Hardware, Roof, Side Panels

Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedParallel-capacity capableIncreases total power capacity by using multiple UPSs simultaneously.Advanced electrical featuresExcellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high efficiencyFrequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.ServiceabilityFront-access servicingSimplifies installation and maintenance while minimizing space requirements.User-replaceable air filtersEnables quick and simple replacement of air filters.Battery replacement without toolsAllows quick, easy battery replacement.Multiple levels of serviceWith the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like APC to do for you.7x24 telephone technical supportOur experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.

Netshelter CX Mini is specifically designed to house a complete small-office IT installation comprised of one or two servers, network hardware and peripheral devices. It combines extreme noise reduction and moderate thermal capacity with exceptional reliability and an all-inclusive, plug-and-play specification. Designed to accept tower form factor servers, the CX Mini can also be converted to accept rack form factor servers using a 12U rack mount conversion kit (AR4000MV12U). The resulting EIA rack is 600 mm/23.6" deep.Includes: Brush strip, Door, Key(s), Lockable door, Office-type Casters, Power strip with (3) IEC receptacles, Qty 1 - IEC to NEMA 5-15P power cord, Qty 1 - IEC-C13 - Shuko input power cord, Qty 2 - Fans, Qty 3 - IEC-C14 - NEMA 5-15R equipment adapter cords, Removeable lockable rear panel, Soundproofing, Unpacking sheet