Showing 550–560 of 659 results

Resettable circuit breakersEnables a quick recovery from overload events.Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.Multiple cable-entry pointsProvides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.Locking cabinetPrevents unauthorized access to the UPS.AvailabilityDual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.Scalable runtimeAllows additional run time to be quickly added as needed.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Battery modules connected in parallelDelivers higher availability through redundant batteries.

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.Sine wave outputEliminates humming and heat generated when powering tubelights and fans.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceLED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.

Reliable and flexible DC power solutions for customer premise broadband, low power wireless and other telecommunication applications.

Smart-UPS® VT Compact 3-phase power protection with scalable runtime for small data centers and other business critical applicationsAPC Smart-UPS VT-24 kW.-30 kVA.-Input 480V 3PH.-Output 120V, 208V, 208V 3PH.-Extended runtime model.

APC Smart-UPS VT, 8000 Watts / 10 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime modelIncludes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Smart UPS signalling RS-232 cable, Start up included, User ManualStandard Lead Time: Usually Ships within 2 Weeks

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceSmartSlotCustomize UPS capabilities with management cards.Cold-start capableProvides temporary battery power when the utility power is out.Resettable circuit breakersEnables a quick recovery from overload events.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS conditionsUser-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)USB connectivityProvides management of the UPS via a USB port (not available on all models).Serial ConnectivityProvides management of the UPS via a serial port.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Network manageableProvides remote management of the UPS over the network.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.

Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources. Scalable runtimeAllows additional run time to be quickly added as needed. Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used. Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault. Battery modules connected in parallelDelivers higher availability through redundant batteries. ServiceabilityUser-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Battery replacement without toolsAllows quick, easy battery replacement. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.Shippable with modules installedEnables pre-installation UPS staging and testing and faster installation. Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules. ManageabilityNetwork manageableProvides remote management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.LCD displayAlpha-Numeric Display which displays system parameters and alarms. Audible alarmsProvides notification of changing utility power and UPS conditions Programmable frequencyEnsures compatibility with different input frequencies. LED status indicatorsQuickly understand unit and power status with visual indicators. SmartSlotCustomize UPS capabilities with management cards. Total Cost of OwnershipInput power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling. Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature. Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass. Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging. ProtectionFrequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Cold-start capableProvides temporary battery power when the utility power is out.

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.High online efficiencyReduces utlility costs, generates less heat.SmartSlotCustomize UPS capabilities with management cards.Cold-start capableProvides temporary battery power when the utility power is out.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.

Modular design- Modular construction - can be deployed as a non-standby and migrate to a standby (UPS) system.Hot-swappable batteries- Ensures clean, uninterrupted power to protected equipment while batteries are being replacedBattery modules connected in parallel- Delivers higher availability through redundant batteries.User-replaceable batteries- Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Plug-and-Play external batteries- Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Scalable runtimeAllows additional run time to be quickly added as needed.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedAutomatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Network manageableProvides remote management of the UPS over the network.InfraStruXure ManagerCompatible Enables centralized management via the APC InfraStruXure Manager.SmartSlot CustomizeUPS capabilities with management cards.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial ConnectivityProvides management of the UPS via a serial port.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.Disconnected battery notificationWarns when a battery is not available to provide backup power.Audible alarmsProvides notification of changing utility power and UPS conditionsFrequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Cold-start capableProvides temporary battery power when the utility power is out.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.