Showing 100–110 of 132 results

CENTRALISED CABLE MANAGEMENTThe Case Fan Hub comes equipped with adhesive pads and magnetic strips, which lets you place it anywhere in the case. It connects to your motherboard with only one cable and powered via SATA. This way, you can do without many additional cables and position it freely in the hidden part of the case.SYNCHRONOUS FAN CONTROLYour set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot will be read out and returned to your system.EXPAND YOUR VENTILATIONEven if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots.Case_Fan_Hub_F03EXTERNAL POWER SUPPLYThe fans are powered directly from your power supply via SATA Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible.

A Worthy Freezer 7 Pro Successor: Better Price – Better PerformanceThe ARCTIC Freezer 7 X CO is a compact CPU cooler with one 100mm fan. It is multi-compatible with common Intel® and AMD® sockets. Due its dual ball bearing it is optimised for Continuous Operation. The Freezer 7 X CO benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimized for high static pressure, ARCTIC was been able to significantly improve the Freezer 7 X CO's cooling performance.Compatible with Intel® and AMD® SocketsThe Freezer 7 X CO is compatible with all current desktop sockets from Intel® and AMD®. By using the mounting frame, simple installation is possible without a need to remove the mainboard.Pre-Applied MX-4 Thermal PastePre-applied, high-performing MX-4 thermal paste ensures quick and clean assembly.More Efficient and Whisper QuietIn addition to operating more quietly, even at maximum speed, the Freezer 7 X CO built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.10 % More Cooling Capacity with Freezer 7 XThe ARCTIC Freezer 7 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.Longer Lifespan Thanks to its Low Coil TemperatureThe Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 ° C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.Offset Heat Pipes Enable Optimal Heat DissipationThe direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.P-Fan for Increased PerformanceInspired by the P-series, the Freezer 7 X CO's fan benefits from all of the advantages of P-fans:High static pressure for increased cooling performance- Broad rpm range- Lower power consumption- Less vibration- PWM for synchronous fan controlDual Ball Bearing for Continuous OperationThe premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.Direct Touch Heat PipesThe Freezer 7 X CO uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

F9Standard Case FanThe F9 case fans are exceptionally quiet and cost effective solutions with efficient cooling performance. The patented low noise impeller maximizes the volume of airflow to offer optimal performance at relatively low fan speed.

Compatibility with LGA1700With the LGA 1700 mounting kit, the entire Freezer 34 Series is compatible with Intel's new Alder lake processors. Even if the socket and heat-spreader are larger compared to the predecessor, the CPU surface has been reduced and remains centered. The Freezer 34 Direct Touch Heatpipes completely covers this area.ARCTIC will provide the required mounting kit free of charge to customers who submit proof of purchase of a processor with an LGA 1700 socket.

Compatibility with LGA1700With the LGA 1700 mounting kit, the Freezer 50 is compatible with Intel's new Alder lake processors. Even if the socket and heat-spreader are larger compared to the predecessor, the CPU surface has been reduced and remains centered. The Freezer 50 Direct Touch Heatpipes completely covers this area.ARCTIC will provide the required mounting kit free of charge to customers who submit proof of purchase of a processor with an LGA 1700 socket.

The P14 fan features completely redesigned fan blades and is optimised for high static pressure. Thus, the P14 is especially effective when used on heatsinks and with higher air resistance.

Not only that we at ARCTIC free the IT world from noise – we care for the right sound as well! As an international company, our expertise extends over noise reduction in PCs to consumer electronics products.

Our coolers have pushed the limits further every year - and all that at dropping noise levels. We have put our utmost effort into innovative technologies and fair prices, what made us well known for products with an unparalleled price/performance ratio. We provide you headroom for over-clocking and guarantee you lowest noise levels at affordable prices.

The F12 case fans are exceptionally quiet and cost effective solutions with efficient cooling performance. The patented low noise impeller maximizes the volume of airflow to offer optimal performance at relatively low fan speed.