Showing 150–160 of 638 results

Get the performance you demand at a price that makes sense with 9/125 single-mode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.Features:A cost effective solution that provides higher bandwidth and support for longer distancesPerfect for use in Gigabit Ethernet applicationsHeadroom for tomorrow’s higher bandwidth needsLifetime warranty against defects of materials and workmanshipConnectors: (2) LC to (2) SCBuffer material: PVCBuffer OD: 900 µmJacket material: PVC (OFNR-rated)Jacket OD: 3.0 mmJacket color: YellowAttenuation @1310 nm: 1.0 dB/kmAttenuation @1550 nm: 0.75 dB/kmMaximum tensile load: 100 N/cmLoaded min. bend radius: 5 cmUnloaded min. bend radius: 3 cmCrush resistance: 750 N/cmImpact resistance: 1000 cyclesFlex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.- Fully compatible with multimode fiber applications- A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances- Perfect for use in Gigabit Ethernet applications- Lifetime warranty against defects of materials and workmanship- Connectors: (2) LC to (2) LC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Orange- Attenuation @850 nm: 3.75 dB/km- Attenuation @1310 nm: 1.5 dB/km- Min. bandwidth @850 nm: 160 kHz/km- Min. bandwidth @1310 nm: 500 kHz/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

With LC to LC termination, this high-quality fiber optic patch cable is specifically designed for fast ethernet, fibre channel, Infiniband®, ATM and gigabit ethernet applications. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. The LC connector with its RJ-style latch clip design is easy to engage and disengage, and gives each connection greater durability in resisting pulls, strains, snags, and impacts during cabling installs and maintenance.The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 62.5/125 multimode fiber, immune to electrical interference.

Get the performance you demand at a price that makes sense with multicolored 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.

Our multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.We offer high-quality LC to LC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.- Connector: LC Male to LC Male- Fiber Size: 62.5/125 micron- Type: Multimode; Duplex- Features: - Color-coded connector keys available in red, blue, green and black - RJ style latch in a connector body half the size of a conventional SC - Small, rugged design - LC connector is easy to engage and disengage featuring a "telephone jack style" release mechanism - Latch design prevents the plug from snagging when jumper cables are being routed - Immune to electrical interference- Application: - Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet - Subsystem: Telecommunications Closet, Equipment Room, Work Area- Includes LC clips

Get the performance you demand at a price that makes sense with 50/125 Multimode Fiber Patch Cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.

Get the performance you demand at a price that makes sense with 9/125 Low-Smoke Zero-Halogen (LSZH) Single-mode Fiber Patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical.- A cost effective solution that provides higher bandwidth and support for longer distances- Perfect for use in Gigabit Ethernet applications- Headroom for tomorrow’s higher bandwidth needs- Lifetime warranty against defects of materials and workmanship- Connectors: (2) ST to (2) ST- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Yellow- Attenuation @1310 nm: 1.0 dB/km- Attenuation @1550 nm: 0.75 dB/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

We offer a high-quality fiber optic patch cable designed with MTRJ to MTRJ termination, and is perfect for Ethernet, multimedia, or communication applications. The MTRJ terminator features a latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. Installation is quick and easy with the no polish, no epoxy, quick termination design. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it.

We offer a high-quality fiber optic patch cable designed with MTRJ to ST termination, and is perfect for Ethernet, multimedia, or communication applications. The MTRJ terminator features a latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. The ST connector features a bayonet locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it.

Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than 62.5/125 fiber. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 50/125 multimode fiber, immune to electrical interference