Showing 310–320 of 638 results

Get the performance you demand at a price that makes sense with 9/125 Low-Smoke Zero-Halogen (LSZH) Single-mode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical.- Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical- A cost effective solution that provides higher bandwidth and support for longer distances- Perfect for use in Gigabit Ethernet applications- Headroom for tomorrow’s higher bandwidth needs- Lifetime warranty against defects of materials and workmanship- Connectors: LC to LC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Yellow- Attenuation @1310 nm: 1.0 dB/km- Attenuation @1550 nm: 0.75 dB/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 Low-Smoke Zero-Halogen (LSZH) Single-mode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical.- Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical- A cost effective solution that provides higher bandwidth and support for longer distances- Perfect for use in Gigabit Ethernet applications- Headroom for tomorrow’s higher bandwidth needs- Lifetime warranty against defects of materials and workmanship- Connectors: LC to SC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Yellow- Attenuation @1310 nm: 1.0 dB/km- Attenuation @1550 nm: 0.75 dB/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 Low-Smoke Zero-Halogen (LSZH) Single-mode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical.- Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical- A cost effective solution that provides higher bandwidth and support for longer distances- Perfect for use in Gigabit Ethernet applications- Headroom for tomorrow’s higher bandwidth needs- Lifetime warranty against defects of materials and workmanship- Connectors: SC to SC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Yellow- Attenuation @1310 nm: 1.0 dB/km- Attenuation @1550 nm: 0.75 dB/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. This high-quality fiber optic patch cable is specifically designed for gigabit ethernet applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125 single mode fiber, immune to electrical interference.

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.Features: - A cost effective solution that provides higher bandwidth and support for longer distances - Perfect for use in Gigabit Ethernet applications - Headroom for tomorrow’s higher bandwidth needs - Color-coded connector keys available in red, blue, green and black - Connectors: LC to LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Blue - Attenuation @1310 nm: 1.0 dB/km - Attenuation @1550 nm: 0.75 dB/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Our multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.We offer high-quality LC to LC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.- Connector: LC Male to LC Male- Fiber Size: 62.5/125 micron- Type: Multimode; Duplex- Features: - Color-coded connector keys available in red, blue, green and black - RJ style latch in a connector body half the size of a conventional SC - Small, rugged design - LC connector is easy to engage and disengage featuring a "telephone jack style" release mechanism - Latch design prevents the plug from snagging when jumper cables are being routed - Immune to electrical interference- Application: - Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet - Subsystem: Telecommunications Closet, Equipment Room, Work Area- Includes LC clips

- Constructed to support OM4 transmission standards- Multimode fiber construction - 50/125 diameter core and cladding- Support for 40 Gigabit and 100 Gigabit Ethernet communication- Lifetime warrantyThis OM4 Duplex Multimode Fiber Optic Cable is ideal for connecting 40GBase-SR4 and 100GBase-SR10, SFP+ and QSFP+ transceivers for 40 and 100 Gigabit network connections. This cable provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 40 or 100 gigabit Ethernet applications in a datacenter or wiring closet..

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications.

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications.

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications.