Showing 30–40 of 435 results

Tripp Lite's BC600SINE UPS system provides long-lasting battery backup for professional workstations, PCs, networking equipment and other sensitive electronics. Sine wave output in both line and battery power modes provides compatibility with all electronic loads, including PC and Mac systems fitted with Active Power Factor Corrected (PFC) power supplies. Uninterruptible Power Supply switches to battery derived sine wave AC output during power failures and severe voltage fluctuations so that connected equipment can be operated normally and shut down without data loss. Provides 18 minutes battery runtime with a typical desktop computer system (100 watts). Includes 3 battery-supported outlets for computer, monitor and one vital system peripheral, plus 3 additional surge suppression-only outlets for printers and other system accessories not requiring battery support. USB port enables optional unattended system shutdown without data loss in case of extended power failure; cable included. USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. PowerAlert software is also included for a variety of desktop and network shutdown agents. Built-in audible alarm and 4 front-panel LEDs indicate line power status, battery power status, overload status and battery low/replace status. 650VA/375W power handling ability supports professional workstations, desktop PCs, point-of-sale equipment, small business phone systems, audio/video equipment and home theater systems. Supports user battery replacement via built-in access panel. 3-year warranty. $150,000 connected equipment insurance (USA, Puerto Rico, & Canada only).Key Features- Tripp Lite’s BC600SINE tower, sine wave UPS system provides long-lasting battery backup for a variety of computer and electronic applications- Sine wave output in both line and battery modes provides compatibility with all electronic loads, including PC and Mac systems fitted with Active Power Factor Corrected (PFC) power supplies- BC600SINE UPS system switches to battery derived sine wave AC output during power failures and severe voltage fluctuations with enough time to shut down without data loss- 650VA / 375 watt UPS capacity with 3.3 minutes runtime at 100% load and 11.1 minutes at 50% load- Provides 18 minutes battery runtime with a typical desktop computer system consuming 100 watts- Includes 3 battery-supported outlets for computer, monitor and one vital system peripheral, plus 3 additional surge suppression-only outlets for printers and other system accessories not requiring battery support- USB port enables optional unattended system shutdown without data loss in case of extended power failure; USB cable included- HID enabled USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- PowerAlert software CD included- Built-in audible alarm with cancel switch warns of power failure conditions; once silenced, alarm will re-sound as batteries approach full discharge- Alarm can be permanently silenced via PowerAlert interface- 4 front panel LEDs indicate line power status, battery power status, overload status and battery low/replace status- Supports user battery replacement via built-in access panel- 3 year product warranty / $150,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)Package Includes- BC600SINE UPS System- USB Cable- Owner's manual

Tripp Lite SU8000RT3U1TF 8000VA / 8kVA / 7200 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance and simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets and rugged industrial locations.- Tripp Lite SU8000RT3U1TF 8kVA / 8000VA / 7200 watt on-line, double-conversion UPS system in 8U total rack/tower configuration (3U UPS power module, 3U external battery pack and 2U step-down transformer)- Detachable PDU with manual bypass switch enables hot-swappable UPS power module replacement with no interruption in output power to connected networking equipment- Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions- Hardwire input; 2 L6-30R, 4 L6-20R and 12 5-15/20R outlets- Maximum installed rack depth of only 32.5 in. / 82.6cm inches- Full-time active power conditioning provides clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise- Double-conversion operation converts raw input from AC to DC, then re-synthesizes output power back to perfect sine wave AC with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types- Maintains full-time sine wave output within 2% of 208/120V nominal at 60Hz during brownouts as low as 100V and overvoltages as high as 300V- Expandable runtime is supported with optional BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PH external battery packs- Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)- Highly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costs- Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement- PowerAlert monitoring software offers detailed site power and UPS updates with support for safe auto-shutdown of connected systems as UPS batteries become depleted- Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA (Network Shutdown Agent) for larger networks and PowerAlert NMS (Network Management System) for monitoring up to 250 SNMP-enabled UPS, PDU and other networking devices- Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232 and USB interfaces- HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces- Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification- Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires removal of USB interface module)- Supports Emergency Power Off (EPO) via built-in interface- Included rail kit supports 8U 19 inch rackmount installation in 4 post racks- Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks- Optional 2-9USTAND supports upright tower placement- Front panel LEDs and LCD readout with scroll controls and password option supports visual monitoring of all major UPS functions and advanced UPS settings for charge level, nominal voltage selection, frequency conversion and other operational parameters- LED / LCD display panel rotates for viewing in rackmount or tower configurations- Network-grade AC surge and noise suppression- Industrial mode option (factory preset) enables supports high current startup loads by momentarily switching to bypass mode in response to short duration overload conditions- External battery packs are field replaceable and hot swappable

Travel-Sized for Convenient Charging of Devices AnywhereCompact form fits comfortably in your purse or backpackIdeal for charging up to 2 smartphones, tablets, e-readers, MP3 players and other handheld mobile devices simultaneouslyWorks with Android, Apple and Windows devicesBuilt-In 12,000mAh Lithium-Ion Battery Charges Without an AC Power OutletCharges at maximum power draw for hours to ensure your devices are ready when you need themDual USB ports provide up to 5V 2.4A of powerAuto-sensing ports adjust amperage to match amperage of connected deviceProtects against short circuits, overvoltage, overcurrent, overcharges and overdischargesEasy to Recharge for the Next Time You Leave Home or OfficeUSB Micro-B port connects to USB charger or computer’s USB-A port to charge internal batteryBuilt-in LEDs indicate at a glance how much battery capacity is left3 ft. USB Micro-B charging cable included

Eaton Rack Cabinet With Side Doors - 42U Rack Height

Eaton 124100027-002 Maintenance Bypass Panel - 15 kVA

Eaton Service/Support - Service - 24 x 7 x After Business Hour - Maintenance - Electronic and Physical

208/240V 5000VA 5000W ON-LINEUPS, UNITY POWER FACTOR,HARDWIRE/L6-30P

Eaton ETN-VS2252440 VS2 25UX24Wx40"D PERF FR RR VS2 25UX24WX40"D-PERF FR/RR:SIDES/TOP:CSTRS:RAILS

The Eaton PW BladeUPS 12kW 208V offers advanced power protection for critical systems with 60A, 5W in, and 4W out connections. Integrated with PXGX SNMP and MODBUS, this UPS ensures seamless power management and monitoring capabilities, ideal for data centers and IT infrastructure requiring reliable backup and network integration.