Showing 400–410 of 434 results

The P137-GHV-V2-K2 4K Video and Ethernet 3-in-1 Accessory Kit expands the capabilities of your Microsoft® Surface® or Surface Pro by adding Gigabit Ethernet access and an external 4K HDMI or VGA monitor. These three lightweight, low-profile adapters fit neatly into your backpack or laptop bag, so you can use them anywhere you take your Surface product.For displaying videos, spreadsheets, documents and presentations on a larger screen, the Mini DisplayPort™ to VGA adapter allows connection to a VGA-enabled monitor at resolutions up to 1920 x 1200, including 1080p. Or use the Mini DisplayPort to HDMI adapter to connect to a 4K-enabled television, monitor or projector at UHD resolutions up to 3840 x 2160 (@ 24/30 Hz).The USB 3.0 SuperSpeed to Gigabit Ethernet adapter allows your Surface to access a 10/100/1000 Mbps wired network without an internal Ethernet card. It achieves USB 3.0 data transfer speeds up to 5 Gbps without compromising signal quality. It complies with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards and supports IEEE 802.3az Energy Efficient Ethernet, as well as full- and half-duplex operations, suspend mode and remote wakeup via link-up, and magic packet.Mini DisplayPort to VGA AdapterConnects your Surface to a VGA displaySupports VGA video resolutions up to 1920 x 1200Thunderbolt 1 & 2 compatibleMini DisplayPort to HDMI AdapterConnects your Surface to an HDMI displaySupports HDMI video resolutions up to 3840 x 2160 (4K x 2K) @ 24/30 HzThunderbolt 1 & 2 compatibleUSB 3.0 SuperSpeed to Gigabit Ethernet AdapterConnects your Surface to a wired Ethernet networkEnsures true 10/100/1000 Mbps network speedsReaches USB 3.0 data transfer speeds up to 5 GbpsComplies with IEEE 802.3, 802.3u, 802.3ab and 802.3az standardsSupports full- and half-duplex, suspend mode and remote wakeup via link-up, and magic packetPlug and Play OperationNo external power supply neededSmall enough to carry easily in laptop bag or backpackCompatible with Microsoft Surface and Surface Pro

Tripp Lite's BP192V787C-1PH External Battery Pack with built-in 7A charger offers extended battery runtime when used in conjunction with compatible Tripp Lite UPS systems. Includes heavy gauge cabling to connect to host UPS. Multiple BP192V787C-1PH batteries can be daisy-chained for longer runtime configurations with appropriate contractor-supplied battery pack interconnection cabling (see manual). Internal battery charger is powered via hardwire connection to 120V 30A electrical service.COMPATIBLE UPS SYSTEMS: SU5000RT4U, SU6000RT4U, SU8000RT4U and other Tripp Lite UPS systems specifying the use of this battery pack.- Offers extended-run UPS operation when used in conjunction with compatible Tripp Lite UPS systems- 10 year design life- Multiple battery packs can be daisy-chained through each other to the UPS for even longer extended run operation- Cabling to connect one BP192V787C-1PH to the host UPS is included - cabling for additional battery packs is contractor supplied- Includes built-in 7A charger powered via hardwire 120VAC 30A input connection

The PDU3EVN6H50B 14.5kW 3-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for IT and industrial applications, it features 48 outlets—42 C13, 6 C19—with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. A six-foot cord with Hubbell CS8365C input plug connects the 3-phase PDU to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.A color touchscreen LCD lets you toggle between menus to monitor input current level per phase and output current per load bank with ±1% billing-grade accuracy, environmental sensor data and network information. It also generates a unique QR code to allow access to the PDU through a mobile device.The 0U PDU mounts vertically in racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

The SV20KM1P3B SmartOnline® SV Series 20kVA 3-Phase On-Line Double-Conversion UPS System delivers true scalability and offers the highest level of secure, uninterrupted power protection. Featuring a modular, scalable design with high-efficiency voltage and frequency independent (VFI) operation, this on-line UPS system is ideal for protecting a variety of critical IT systems.The SV20KM1P3B includes pre-installed input, bypass and output breakers, as well as a static transfer switch (STS), one 20kVA SV20PM power module and three SVBM battery modules. Space is included for up to three additional user-installable SV20PM power modules and one SVBM internal battery module. External ±120VDC battery options, such as BP240V370, are also available from Tripp Lite for even more extended runtime.The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.With up to 92% efficiency in standard mode and up to 99% efficiency in optional economy mode, this 20kVA UPS system helps you reduce operating and cooling costs. Automatic and manual bypass options keep connected equipment operational during routine maintenance or critical power module failure. Front-panel display offers full UPS condition and status reporting.20kVA 18kW 3-Phase Medium-Chassis UPS System- Supports 208/120V or 220/127V AC 50/60Hz Wye 4-wire plus Earth hardwire input and output wiring- Dual hardwire input design enables operation from up to 2 power sources- Network-grade sine-wave AC output with 1% output voltage regulation and less than 1% output total harmonic distortion- Tested to UL 1778 (U.S.), CSA (Canada) and NOM (Mexico) standards- High 0.9 power factor for maximum power to the connected loadPre-Installed WEBCARDLX Network Interface- Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH- Supports 10/100 Mbps auto-sensing for communication with an Ethernet network- Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status- No Java requiredModular, Scalable Design for Maximum Flexibility- Modular configuration with hot-swappable power modules and batteries enables easy, fast maintenance with zero downtime- Open slots for up to 3 additional 20kVA SV20PM power modules accommodate increased capacity up to 80kVA (or 60kVA with N+1 fault tolerance)- Open slot for 1 additional SVBM internal battery for extended runtimeOptional Economy Mode- Up to 99% efficient in optional economy mode to lower operating and cooling costsWide Input/Narrow Output Voltage Operating Range- Enables full continuous online operation during brownouts as low as 121V and overvoltages up to 253V- Regulates output voltage within 1% of the selected nominal output voltage in on-line double-conversion modeAdvanced IGBT Inverter with Digital Signal Processor (DSP) Technology- Provides for less than 2% input total harmonic distortion (THDi) to support 1:1 generator sizing and prevent the need to oversize generator systems relative to UPS capacityAutomatic and Manual Bypass Options- Keep connected equipment operational during routine maintenance or critical power module failure

The SV20KM1P2B SmartOnline® SV Series 20kVA 3-Phase On-Line Double-Conversion UPS System delivers true scalability and offers the highest level of secure, uninterrupted power protection. Featuring a modular, scalable design with high-efficiency voltage and frequency independent (VFI) operation, this on-line UPS system is ideal for protecting a variety of critical IT systems.The SV20KM1P2B includes pre-installed input, bypass and output breakers, as well as a static transfer switch (STS), one 20kVA SV20PM power module and two SVBM battery modules. Space is included for up to three additional user-installable SV20PM power modules and two SVBM internal battery modules. External ±120VDC battery options, such as BP240V370, are also available from Tripp Lite for even more extended runtime.The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.With up to 92% efficiency in standard mode and up to 99% efficiency in optional economy mode, this 20kVA UPS system helps you reduce operating and cooling costs. Automatic and manual bypass options keep connected equipment operational during routine maintenance or critical power module failure. Front-panel display offers full UPS condition and status reporting.20kVA 18kW 3-Phase Medium-Chassis UPS System- Supports 208/120V or 220/127V AC 50/60Hz Wye 4-wire plus Earth hardwire input and output wiring- Dual hardwire input design enables operation from up to 2 power sources- Network-grade sine-wave AC output with 1% output voltage regulation and less than 1% output total harmonic distortion- Tested to UL 1778 (U.S.), CSA (Canada) and NOM (Mexico) standards- High 0.9 power factor for maximum power to the connected loadPre-Installed WEBCARDLX Network Interface- Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH- Supports 10/100 Mbps auto-sensing for communication with an Ethernet network- Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status- No Java requiredModular, Scalable Design for Maximum Flexibility- Modular configuration with hot-swappable power modules and batteries enables easy, fast maintenance with zero downtime- Open slots for up to 3 additional 20kVA SV20PM power modules accommodate increased capacity up to 80kVA (or 60kVA with N+1 fault tolerance)- Open slots for up to 2 additional SVBM internal batteries for extended runtimeOptional Economy Mode- Up to 99% efficient in optional economy mode to lower operating and cooling costsWide Input/Narrow Output Voltage Operating Range- Enables full continuous online operation during brownouts as low as 121V and overvoltages up to 253V- Regulates output voltage within 1% of the selected nominal output voltage in on-line double-conversion modeAdvanced IGBT Inverter with Digital Signal Processor (DSP) Technology- Provides for less than 2% input total harmonic distortion (THDi) to support 1:1 generator sizing and prevent the need to oversize generator systems relative to UPS capacityAutomatic and Manual Bypass Options- Keep connected equipment operational during routine maintenance or critical power module failure

The Eaton 9155 UPS Battery Backup offers reliable and efficient power protection for critical systems. Designed for small to mid-sized data centers, it provides backup power to ensure continuous operation during power outages or fluctuations. Its advanced battery management system enhances battery life, while its compact footprint allows easy integration into your IT infrastructure, ensuring high availability for vital equipment.

Extends a Gigabit Ethernet Signal up to 2,000 m (1804 ft.) Using SC Multimode CableConverts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speedFiber optic technology more effective than Cat5e/6 over long distancesSupports 50/125 multimode fiber optic cabling up to 2,000 mSupports 62.5/125 multimode fiber optic cabling up to 400 mConnection requires an N785-INT-SC at both endsAdvanced Monitoring and ControlSupports automatic sensing of network speedSupports both full-duplex and half-duplex operationSupports automatic MDI/MDI-X configuration6 LEDs indicate network and fiber link status at a glancePlug-and-Play OperationNo additional software or drivers requiredCompact unit sets up in minutesDurable metal housing designed to lastPower supply includes international plug adapters for North America, U.K., Europe and Australia

Eaton ePDU G3 24-Outlets PDU - 460P9W - 6 x IEC 60320 C19, 18 x IEC 60320 C13

Tripp Lite 36-Device AC Charging Station Cart for Chromebooks and Laptops, BS 1363, 230V - 3 m Cord. Type: Portable device management cart, Product color: Black, Placement: Floor. Supported portable devices: Laptop, Maximum screen size: 15", Certification: IEC60950-1, IEC62368-1, NOM. AC input voltage: 230 V, AC input frequency: 50 Hz, Current: 10 A. Width: 28" (710.4 mm), Depth: 22.1" (561.3 mm), Height: 42.3" (1074.5 mm). Cables included: AC, Number of keys included: 2 pc(s)