Showing 0–10 of 48 results

- 15U 600 mm (23.6 in.) Depth Flat Pack Black- Ideal for 19" rackmount applications- Maximum static load of 30 kg- Usable depth: 385 mm (15.16 in.)- Cable entry via rear or top panel- 4MM toughened glass door- Rear door for easy access to back of cabinet- Reversible Front door- Cold-rolled galvanized SPCC steel with up to 1.5 mm thickness- Ships Flatpacked

- Impedance matched-Gold-plated contacts-Unique PVC jacket-Snag-free boots-Strain relief-Standards tested-Lifetime Warranty

- Save time and money by delivering data and power via existing network cables- Power output of up to 60 watts over a four-pair Cat5 or Cat6 network cable- Compatible with IEEE 802.3bt (Ultra-PoE) IEEE 802.3at and IEEE 802.3af- Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges VoIP [Voice over Internet Protocol] telephones IP surveillance cameras)- Distance support: up to 100 m (328 ft.)- Internal power supply- Fanless design ideal for silent operation- Three-Year Warranty

- IEEE 802.3at/af (PoE+/PoE) Compliant PoE Power Budget of 370 W Two 1G SFP Open Slots 19" Rackmount- Provides up to 24 PoE network devices with power and data- Two 1G small form-factor pluggable (SFP) module slots- PoE power budget of 370 watts- Power output up to 30 watts per port- Manual VLAN mode to isolate ports 1 to 24 from each other while allowing them to communicate with SFP uplink ports 25 and 26- Manual Flow Control Off mode to disable the Gigabit Ethernet switch's flow-control function- 52 Gbps switch fabric- 10/100/1000 auto-sensing ports that automatically detect optimal network speeds- Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification- Green Ethernet power-saving technology that deactivates unused ports and adjusts power levels based on the cable length- Saves installation costs by delivering data and power over existing network cables- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g. wireless access points VoIP phones IP cameras)- Supports IEEE 802.3at/af detection and short circuit overload and high-voltage protection- Auto-MDIX and NWay auto-negotiation support on all RJ45 ports- Supports jumbo frames up to 9.2 kBytes- All RJ45 ports with Auto-MDIX (auto uplink) support- Store and forward switching architecture- Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode- Supports 8k MAC address entries with Auto-learning and Auto-aging- 512 kBytes buffer memory- Two high-volume cooling fans to ensure perfect ventilation- Includes 19" rackmount brackets- Fully NDAA-compliant

- Provides power and data connection for up to 24 PoE network devices- Saves installation costs by delivering data and power over existing network cables- 10/100/1000 Mbps auto-sensing ports automatically detect optimal network speeds- Four combo small-form-factor pluggable GBIC module slots (SFP) and four RJ45 copper uplinks- IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports- Power output up to 30 watts per port- PoE power budget of 370 watts- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points VoIP phones IP cameras)- Supports IEEE 802.3at/af detection and short circuit overload and high-voltage protection- All RJ45 ports equipped with Auto-MDIX and auto-negotiation support- Web-based configuration- Remote reboot/restart- Supports SNMP management- Supports VLAN (protocol-based and port-based)- Supports link aggregation (trunking)- IGMP Snooping for multicast filtering- Supports bandwidth control per port- Supports port mirroring- Supports two types of QoS: IEEE 802.1p and DSCP- Broadcast storm control with multicast packet rate settings- Supports jumbo frames up to 9.6 kBytes- Store and forward switching architecture- Full/half duplex operation- IEEE 802.3x flow control for full duplex- Supports 8k MAC address entries- LEDs for power link/activity and PoE- Two high-volume cooling fans to ensure perfect ventilation- Includes 19" rackmount brackets

Provides power and data connection for up to 16 PoE network devicesSave installation cost by delivering data and power over existing network cables10/100/1000 auto-sensing ports automatically detect optimal network speedsTwo small form-factor pluggable GBIC module slots (SFP)IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output portsPower output up to 30 watts per port*PoE power budget of 374 watts36 Gbps switch fabricSupports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points VoIP phones IP cameras etc.)Supports IEEE 802.3at/af detection and short circuit overload and high-voltage protectionAll RJ45 ports with Auto-MDIX and NWay auto-negotiation supportComplies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specificationPoE management functions include PoE port settings priority power-on delay scheduled PoE device restart and PoE device monitoringSNMP Management and Remote Monitoring (RMON)SNMP V1 V2C V3 with RMON groups 1 2 3 & 9IPv4/v6 dual protocolSupports VLAN (tag-based and port-based)Provides IEEE 802.1x port-based securitySupports link aggregation (trunking)Supports bandwidth control per portSupports port mirroringSupports two types of QoS: port-based and DSCPBroadcast storm control with multicast packet rate settings512 kBytes buffer memorySupports 8k MAC address entriesSupports jumbo frames up to 9 kBytesSupports Rapid Spanning Tree/Spanning Tree protocolStore and forward switching architectureFull/half duplex operationIEEE 802.3x flow control for full duplexConfiguration via Web browser Telnet or SSHLEDs for power link/activity and PoETwo high-volume cooling fans ensure perfect ventilationThree-Year Warranty

- 10/100/1000 auto-sensing ports automatically detect optimal network speeds- Auto-MDIX (auto uplink) support for all RJ45 ports- For use on desktop or mounted in standard 19" rack- Supports NWay auto-negotiation- Store and forward switching architecture- Full/half duplex operation- Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode- Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length- Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification- 48 Gbps switch fabric- Supports jumbo frames up to 9 kBytes- Supports 16k MAC address entries- 512 kBytes buffer memory- Supports MAC address auto-learning and auto-aging- Fanless design ideal for silent operation- Includes 19" rackmount brackets

- 8-Port Fast Ethernet PoE/PoE+ Switch- The Intellinet 8-Port Fast Ethernet PoE+ Switch (560764) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Fast Ethernet ports (all of which support 802.3at/af PoE/PoE+) this switch can power wireless LAN access points and bridges VoIP phones IP video cameras and more while delivering network speeds of up to 100 Mbps. - All RJ45 ports with Auto-MDIX (auto uplink) support- Store and forward switching architecture- IEEE 802.3x flow control for full duplex- Supports up to 4096 MAC address entries- Desktop Packet Buffer Memory: 160kBytes - Total Ports: 8 - PoE Ports: 8 RJ45 802.3at/af (PoE and PoE+) - Maximum PoE Power Consumption: 70W - IEEE Protocols: 802.3 802.3af 802.3at 802.3u 802.3x

- Ideal for 19" rackmount applications- Maximum static load of 30 kg- Usable depth: 385 mm (15.16 in.)- Cable entry via rear or top panel- 4MM toughened glass door- Rear door for easy access to back of cabinet- Reversible Front door- Cold-rolled galvanized SPCC steel with up to 1.5 mm thickness- Ships Flatpacked

- Open frame for easy access to equipment from all sides and for maximum airflow with efficient heat dissipation- Front-hinged design that lets the frame swing open for even easier access to panels- Wall-mountable for network areas with limited floor space (wall-mounting hardware not included)- Integrity/security bars for added stability and resistance to tampering- Simple and cost-effective solution; great for testing IT equipment and for secure environments that do not require a lockable network cabinet- Sturdy high-quality cold-rolled SPCC steel construction with antistatic powder coating- Two posts with front-mounting rails and reversible swing frame- Maximum load capacity of 30 kg (66 lbs.) with frame closed or 10 kg (22 lbs.) with frame opened- Usable installation depth: 400 mm (15.75 in.)- IEC 60297 / EIA 310-compliant; compatible with all standard 19 in. / 482.6 mm rack-mount equipment- Ships flat-packed to save space and freight costs- Includes 19" mounting material with 20 cage nut sets- Frame can be opened on the left or right to swing as required