Showing 40–50 of 67 results

(Y) Training LeadUseful training lead with 2 QD connectors which allows a supervisor to join the call if needed by simply unmuting their microphone via the rocker switch on the supervisor QD connector.

Quick Disconnect cable required for telecom headsets to enable direct connection to most standard telephone system handsets.The BL-10+P Geni lead is perfect for offices where there is more than one type of phone system in use – the BL-10+P Geni lead comes with a compatibility switch that allows you to adjust to the correct type of handset quickly, rather than having to have two separate leads for your phones.Simple 8-position slide adjustment – no need for a user manual. Simply slide the switch until a dial tone is heard. Standard RJ11 connector connects to virtually all telephones using a standard modular plug. Standard Plantronics compatible Quick Disconnect plug to the headset.Works with any JPL or Plantronics headset equipped with Quick Disconnect. Built-in low-current microphone amplifier enables perfect operation with telephones that require extra signal gain.

Quick Disconnect cable required for telecom headsets to enable direct connection to most standard telephone system handsets.

Longer Headset LifeBecause of the modular design of the TT3-Avant, if the speaker/microphone breaks out of warranty, you only need to replace this part, which means a longer life for the headset and a cost saving for you because you do not need to replace the complete headset.Cost of Ownership ReducedWhy change the whole headset when changing half is the solution!

If your headset is low on charge and you have an important call to make that won’t last the charge, you can charge your JPL-Element-X500 DECT headset during a call by connecting a micro USB jack to the port on the side of the microphone boom arm.

Allows connection between PLX and GNThis PLX to GN Adaptor allows the user to connect either a PLX QD headset with a GN QD cable or vice versa, a GN QD headset with a PLX QD cable.Mixed headset establishments using both PLX and GN within the same environment will find this adaptor very useful.

Electronically connects your DECT headset base to your telephoneEnables remote operation, answer/end calls, for wireless headset use with various phones, thus eliminating the need for a mechanical handset lifterUSB-A to RJ-45 and RJ-9

Electronically connects your DECT headset base to your telephoneEnables remote operation, answer/end calls, for wireless headset use with various phones, thus eliminating the need for a mechanical handset lifterEHS Adapter, JTAG cable, RJ-45 to RJ-45

For use with the BT500D headsetConnects your BT500 to your PC or LaptopThe headset and USB Dongle are pre-paired and ready for useSoftphone interoperability through USB/computer with 3CX, Avaya One-X Agent, Broadsoft UC-one, Cisco Jabber, Counter Path, or Skype for Business with assistance from the JPL Gateway.JPL Gateway software must be installed and running for remote call control functions to work with supported softphones.

For when more concentrated calls are requiredThe modular system of the JPL-Explore allows you to swap headbands from monaural to binaural and vice versa to suit the way you work.The JPL-Explore is supplied with a monaural headband. You may prefer a binaural headband for more concentrated calls.