Showing 140–150 of 263 results

Kingston’s NV3 PCIe 4.0 NVMe SSD is a next-gen storage solution powered by a Gen 4x4 NVMe controller, delivering read/write speeds up to 6,000/5,000MB/s*. It offers lower power consumption and reduced heat, optimizing your system's performance without compromising value. The compact, single-sided M.2 2280 (22x80mm) design expands storage up to 4TB**, conserving space for other components. Experience NVMe speeds with NV3.Available in capacities from 500GB – 4TB**, to give you all the space you need for applications, documents, photos, videos, games and more.Gen 4x4 NVMe PCIe performanceUpgrade your system with read/write speeds up to 6,000/5,000MB/s*.Ideal for systems with limited spaceEasily integrate into designs with M.2 connectors. Perfect for thin laptops and small form factor PCs.Increased storage spaceAvailable in a variety of high capacities up to 4TB**, providing ample space to store files, videos, documents, and games with room to spare.

Efficient performance for thinner notebooks and systemsKingston’s NV1 NVMe™ PCIe SSD is a substantial storage solution that offers read/write speeds up to 2,100/1,700MB/s, which is 3 to 4 times faster than a SATA-based SSD, and 35 times faster than a traditional hard drive. NV1 works with lower power, lower heat, and quicker loading time. The efficient performance and single-sided M.2 2280 (22x80mm) design makes NV1 ideal for thin notebooks and systems with limited space.Available in capacities from 500GB – 2TB to give you all the space you need for applications, documents, photos, videos, and more.NVMe PCIe PerformanceOffers read/write speeds up to 2,100/1,700MB/sIdeal for systems with limited spaceEasily integrate into designs with M.2 connectors. Perfect for thin laptops and small form factor PCs.Multiple CapacitiesAvailable in a range of capacities up to 2TB to meet your data storage requirements.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access. The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys. Fast dual-channel performance is offered on KP200 drives with 512GB and on KP200C drives with 64GB-512GB capacities.The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems. With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.Fast dual-channel performance is offered on KP200 drives with 512GB and on KP200C drives with 64GB-512GB capacities.FIPS 140-3 Level 3 (Pending) certifiedKP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.OS and device independentWith KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems. Multi-PIN optionUsers have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.Global and Session Read-Only (write protect) modes Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access. The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys. Fast dual-channel performance is offered on KP200 drives with 512GB and on KP200C drives with 64GB-512GB capacities.The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems. With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.Fast dual-channel performance is offered on KP200 drives with 512GB and on KP200C drives with 64GB-512GB capacities.FIPS 140-3 Level 3 (Pending) certifiedKP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.OS and device independentWith KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems. Multi-PIN optionUsers have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.Global and Session Read-Only (write protect) modes Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

Kingston’s NV2 PCIe 4.0 NVMe SSD is a substantial next-gen storage solution powered by a Gen 4x4 NVMe controller. NV2 delivers read/write speeds up to 3,500/2,800MB/s* with lower power requirements and lower heat to help optimize your system’s performance and deliver value without sacrifice. The compact single-sided M.2 2280 (22x80mm) design expands storage up to 4TB** while saving space for other components, making NV2 ideal for thinner notebooks, small form factor (SFF) systems, and DIY motherboards. Available in capacities from 250GB – 4TB** to give you all the space you need for applications, documents, photos, videos, and more.Gen 4x4 NVMe PCIe performanceDelivers read/ write speeds of up to 3,500/2,800MB/s* for an overall faster system.Ideal for systems with limited spaceEasily integrate into designs with M.2 connectors. Perfect for thin laptops and small-form-factor PCs.Extended capacitiesAvailable in a range of high capacities up to 4TB** to meet your data storage requirements.

Kingston DataTraveler® Exodia™ Onyx is a USB 3.2 Gen 1 compliant** flash drive that delivers quick transfers for simple and easy storage. Designed with a sleek matte black casing, the DT Exodia Onyx is the perfect affordable companion for stylish storage. The drive is available in capacities up to 256GB*. Refined yet functional designSleek matte black casing paired with a moving cap protects USB connector and your data when not in use.Reliable performanceThe lightweight USB 3.2 Gen 1 compliant** storage solution delivers quick file transfers.Ultimate portabilityLoop easily attaches to key rings for perfect on-the-go storage.

Kingston’s NV2 PCIe 4.0 NVMe SSD is a substantial next-gen storage solution powered by a Gen 4x4 NVMe controller. NV2 delivers read/write speeds up to 3,500/2,800MB/s* with lower power requirements and lower heat to help optimize your system’s performance and deliver value without sacrifice. The compact single-sided M.2 2280 (22x80mm) design expands storage up to 4TB** while saving space for other components, making NV2 ideal for thinner notebooks, small form factor (SFF) systems, and DIY motherboards. Available in capacities from 250GB – 4TB** to give you all the space you need for applications, documents, photos, videos, and more.Gen 4x4 NVMe PCIe performanceDelivers read/ write speeds of up to 3,500/2,800MB/s* for an overall faster system.Ideal for systems with limited spaceEasily integrate into designs with M.2 connectors. Perfect for thin laptops and small-form-factor PCs.Extended capacitiesAvailable in a range of high capacities up to 4TB** to meet your data storage requirements.

XTS-AES 256-bit Encrypted for Data Protection with Automatic USBtoCloud® Back UpKingston IronKey Locker+ 50 USB Flash drives provide consumer-grade security with AES 256-bit hardware-encryption in XTS mode, including safeguards against BadUSB with digitally-signed firmware and Brute Force password attacks. LP50 is also TAA compliant. LP50 now supports multi-password (Admin and User) option with Complex or Passphrase modes. Complex mode allows for passwords from 6-16 characters using 3 out of 4 character sets. New passphrase mode allows for a numeric PIN, sentence, list of words or even lyrics from 10 to 64 characters long. Admin can enable a User password, or reset the User password to restore access to data. To aid in password entry, the “eye” symbol can be enabled to reveal the typed in password, reducing typos leading to failed login attempts. Brute Force attack protection locks out User upon 10 invalid password entries in a row and crypto-erases the drive if the Admin password is entered incorrectly 10 times in a row. Additionally, a built-in virtual keyboard shields passwords from keyloggers or screenloggers.Locker+ 50 is designed for convenience with a small metal casing and built-in key loop to take data anywhere. LP50 also features optional USBtoCloud (by ClevX®) backup to access data on the drive from your personal cloud storage through Google Drive™, OneDrive (Microsoft®), Amazon Cloud Drive, Dropbox™ or Box. LP50 is easy for anyone to setup and use, with no application installation required; all the software and security needed is already on the drive. Works on both Windows® and macOS® so users can access files from multiple systems.Hardware-encrypted USB 3.1 drive with XTS-AES 256-bit encryptionSafeguard important data with built-in protections against BadUSB & Brute Force attacks.Multi-Password (Admin and User) Option with Complex/Passphrase modesAdmin can reset a User password to restore User’s access to data. New Passphrase ModeSelect between Complex or Passphrase password mode. Passphrases can be a numeric PIN, sentence with space characters, list of words or even lyrics – from 10 to 64 characters long.Automatic Personal Cloud BackupAccess data stored on IronKey Locker+ 50 from your personal cloud storage. Additional Security FeaturesReduce failed login attempts and frustration by enabling “eye” button to view password typed. Use virtual keyboard to shield password entry from keyloggers and screenloggers.

Kingston’s High-Endurance microSD Card is built to withstand write-intensive applications such as professional & home surveillance cameras, dash cams and body cams. With 24/7 seamless recording and playback in Full HD 1080p1, it’s guaranteed to capture critical recordings when you need it the most. The High-Endurance microSD Card is engineered and tested for use in harsh conditions and is durable enough to protect itself from extreme temperatures, shock, water and x-rays2. Kingston High-Endurance microSD Cards are available in 32GB-256GB capacities and are backed by a three-year warranty, free technical support and legendary Kingston® reliability.Continuous Surveillance24/7 recording for professional surveillance systemsSeamless and reliable recordingWhether you are on the road or in the comfort of your own home, the Kingston High-Endurance microSD Card is guaranteed to capture thousands of hours of video on your dash cam or home security camera.

Kingston’s Industrial SD card delivers superior endurance and reliability across industrial applications including automation, telecommunication, data systems, building management and POS systems. It is designed and tested to withstand the most demanding environmental factors. With an operating temperature of -40°C to 85°C, Kingston’s Industrial SD card can operate normally in extended temperature ranges. The card utilises the industry-leading pSLC mode to provide reliable read speeds of up to 100MB/s*. It is rated up to 1920 TBW** with 30K P/E cycles and has a built-in feature set specific to endurance, performance and industrial needs. Kingston’s Industrial SD is available in capacities from 8GB–64GB***.Durable in extreme temperaturesDesigned and tested to withstand an extended temperature range of -40°C to 85°C for use in harsh conditions.High endurance and reliabilityUp to 1920 TBW** and rated to endure 30K P/E cycles to meet requirements for a wide range of industrial applications.UHS-I compliantSpeeds of up to 100MB/s* with U3, V30 and A1 support for Android-based applicationsIndustrial-grade built-in featuresWear levelling, bad block management and an optional health monitoring tool to manage the lifespan of your card****.