Showing 0–10 of 22 results

The Plugable USBC-HDMI adapter enables an HDMI 2.0 output at resolutions up to 3840×2160@60Hz (4K/UHD) from systems which support “DisplayPort Alternate Mode” (Alt Mode) via USB-C such as the Apple 12″ Retina MacBook 2015 / 2016, the Chromebook Pixel [2] 2015, Lenovo P50/P70, XPS 13 / 15, and many more upcoming systems based on the Intel Skylake/Alpine Ridge platform.Alt Mode adapters allow you to add an additional display output easily and inexpensively on supported systems. Since “DisplayPort Alternate Mode” is a direct pipeline to your graphics processor via special functionality introduced in USB 3.1, there is no performance penalty to using the adapter; the attached display should be just as responsive and functional as if it were connected to a video port directly attached to your system’s motherboard.Please note: the 12″ Retina MacBook does not support 4K@60Hz output, it has a maximum output of 4K@30Hz. Supported resolutions and refresh rates of the adapter are entirely dependent on the host device and attached display specifications.

Plugable USB 2.0 2-Port HubFeaturing a clean, compact design, the Plugable USB 2.0 2-Port Hub (USB2-2PORT) enables two devices to share a single available USB port with full USB 2.0 compatibility and performance. The hub uses a high-quality NEC chipset.Common Uses for the USB 2.0 HubCommon uses include connecting both keyboard and mouse via a single USB cable, industrial environments where space is a premium, and for any situation where a simple USB 2-port splitter is required. Great for travel due to the ultra-compact design and built-in 12in USB cable.No Charging CapabilitiesThe Plugable hub is for data only and does not support charging of the connected devices. Functions as a USB hub only and will not charge phones, tablets, iPads, iPhones, or other tablet and smartphone devices with or without a PC connected. Not BC 1.1 / 1.2 compatible.Does It Need Power?This bus-powered hub shares available power (500mA) from the single upstream USB port to each of the two downstream USB ports. Because power is shared, devices connected via the hub should be low powered (keyboards, mice, etc), or self-powered (printers, powered hubs, externally powered hard drives).Devices That Are Not Compatible With This 2-Port HubThe Plugable 2-Port hub cannot be used with built-in car stereo systems or aftermarket systems such as Android Auto and Apple CarPlay as these systems do not support USB hubs.

Two Powerful Functions in One Powerful DeviceThe Plugable USB 3.0 and USB-C 7-Port Hub (USBC-HUB7BC) delivers performance in a way that few others can match. Connected to a laptop–USB-A and USB-C connections included–you have instant access to 7 USB ports, each capable of transfer speeds up to 5Gbps. And here’s something unique, you also get maximum USB charging speeds on every single port. If you don’t need data, this USB powered hub comes bundled with a UL Certified power adapter capable of providing 5V at up to 2.4A to each of the seven USB ports. No computer required. And thanks to smart charging circuits, each device powers at its own max rate. No need to worry about overcharging. Standalone or StackedAs a standalone unit, the USBC-HUB7BC stands out for its SuperSpeed data and high-speed charging. But what if you needed to charge 14, 21, even 210 devices? This multi-port powered USB Hub is designed to be stacked. As your need for power or ports grows, the USBC-HUB7BC can grow right along with it. All seven ports are lined up along the front with plenty of space between, so even when stacked, you won’t fumble with the connections.Charging and Data on Every PortWhen you need performance on every port, you need a hub that offers full functionality on every port. Other hubs split the duty of data and charging between ports, so you’re only getting two or three charging slots. The Plugable USB 3.0 and USB-C 7-Port Hub goes all in. Get data transfer speeds up to 5Gbps, and BC 1.2 charging at 1.5A on every port. No exceptions.Designed to Work Where You WorkThe USBC-HUB7BC centralizes your charging efforts. At home, set it up as a community charging spot for phones and tablets. At school, combine two or three to easily charge and sync student devices. And in large-scale operations, deploy as many hubs as you need to test and charge at scale.

Fast and Reliable Wins the Race Built around the Goshen Ridge chipset from Intel, the USB4-HUB3A gives you access to everything USB4 has to offer. That means high speed—each port is capable of data transfer speeds up to 40Gbps, the maximum rate available through a USB-C port. But data isn’t the only thing flowing through these ports. Thanks to intelligent power handling, you’ll also get up to 15W of charging power for each of your connected devices, evenly distributed across the ports to ensure a balanced load. And because this USB4 dock ships with the latest certified firmware from Intel, you can count on smooth operation. USB4 and More Because the USB 4 hub is Thunderbolt certified and built around a Goshen Ridge chipset, your USB-C, Thunderbolt 3, Thunderbolt 4, and USB4 devices are supported, too. And don’t worry if you’re not sure what your system supports. The USB4-HUB3A will detect your computer’s capabilities and adjust accordingly. The Beauty of 8K is on Display Don’t limit yourself to the confines of a little laptop screen. With this multiport hub, connect up to two 4K 60Hz displays or one 8K 30Hz display to a USB4 or Thunderbolt 4 PC or a Thunderbolt 3 or USB4 Mac (M1 Macs are limited to one display). It even comes with a USB-C to HDMI 2.0 adapter to make connecting that second screen all the easier. It’s worth noting that external display support is dependent on host computer’s capabilities.

There's no shortage of options when it comes to adding screens to your laptop, and that’s where things get complicated (and expensive). The Plugable USB 3.0 and USB C to Dual HDMI Adapter (UGA-HDMI-2S) keeps things simple. A one plug solution that adds two HDMI ports to your computer, the HDMI monitor adapter leaves your other ports open for peripherals. And because this adapter doesn’t add on extra functionality, it’s a lot more affordable than a docking station.Multiple DisplaysWith the UGA-HDMI-2S, easily connect two HDMI monitors. Of course, dual display is just the start. On Windows machines, combine multiple adapters to add up to 8 monitors. On a Mac, combine multiple adapters to add up to 3 monitors.See It AllIt doesn’t matter if you connect through a USB 3.0 port or a Thunderbolt 4 port, you can count on resolutions up to 1920x1080 @ 60Hz—even when adding multiple adapters.No Connection ComplexityA hybrid 2-in-1 cable takes the guesswork out of picking an adapter that matches your computer. This HDMI dual monitor adapter works with the ports you have now, and the ports you’ll have on your next computer—USB 3.0, USB-C, USB4, even Thunderbolt 3 and Thunderbolt 4. It’s compact, too, so it’s as portable as your laptop.

You have two 4K HDMI screens and one USB-C port. It’d be nice to find an easy way to combine them with a cost effective docking station alternative. Now the Plugable USB-C Dual 4K HDMI MST Display Adapter (USBC-MSTH2) has you covered. Compatible with Windows and Chrome computers with USB-C DP 1.4 support—so most modern laptops—a single USB-C port can be used to extend your display across two 4K screens at 60Hz with this adapter for monitor to usb. Designed around Multi-Stream Transport (MST), the display uses Alt Mode graphics and an MST chip to drive two independent displays natively from the host laptop—no driver installation required. And with HDCP support—something a lot of video adapters don’t have—you can play copy-protected media through streaming services like Netflix and Hulu. With a form factor smaller than a full docking station, you can easily slip this adapter in your bag for use in between your home, office, or other workspace.A couple of things to note about this USB C HDMI adapter. If your computer only supports DP 1.2, you can enjoy all the same benefits, but at a resolution of 1080p 60Hz across both displays. Mac doesn’t support MST—the underlying technology driving the dual HDMI adapter for 2 monitors, so while the dual hdmi adapter is technically compatible with Apple USB-C devices, you can only extend to one 4k monitor, the second external monitor will be mirrored. A couple of things to note about this USB C HDMI adapter. If your computer only supports DP 1.2, you can enjoy all the same benefits, but at a resolution of 1080p 60Hz across both displays. Mac doesn’t support MST—the underlying technology driving the dual HDMI adapter for 2 monitors, so while you can use the USBC-MSTH2 with an Apple device, you can only extend to one 4k monitor, the second external monitor will be mirrored.

Quickly and easily add 2 Ultra HD/4K monitors to your USB 3.0 or USB-C laptop or desktop with the Plugable USB 3.0 and USB-C Dual 4K Display Adapter (USBC-6950U).The USBC-6950U is the first and only dual display adapter that supports two HDMI or DisplayPort displays with a resolution of 4K 60Hz (3840x2160 @ 60Hz) each, without the need of additional video adapters. This display adapter lets you see and do more with your existing PC by connecting a single USB 3.0 or USB-C connection.The USBC-6950U is an essential device to help maximize your productivity and your workspace. Great for managing email, web applications, Microsoft office, and more across multiple displays.This adapter has two HDMI 2.0 ports and two DP 1.2 ports, and is backwards compatible with previous HDMI and DP specifications at lower resolutions.Multiple DisplaysEquipped with HDMI 2.0 and DP 1.2 ports, our adapter allows you to mix and match display connections so it can fit your workstation needs.Please note, only two external displays supported. If two displays are already connected the unoccupied video output ports on the adapter will not be able to output video.UHD ImageConnect your HDMI or DP equipped monitor, television, or projector to your laptop and achieve resolutions up to 3840x2160 @ 60Hz (4K 60Hz).Other popular supported resolutions include 3440x1440, 2560x1440, 1920x1200, 1920x1080, and lower.FlexibilityIncludes a native USB-C connection with stowable cable and USB 3.0 (“USB-A”) adapter.This allows you to adapt to the USB port of your choosing without performance compromises, as well as providing a storage option to take the adapter with you on-the-go.Expand Your Workspace Up to Six DisplaysThe USBC-6950U provides users the ability to add up to two additional 4K displays, allowing them to expand their workflow out between different windows, view multiple projects at once, and easily reference materials when needed. With these products, although they are effective and valuable on their own, they can be easily added to an existing docking station for expanded capabilities. By doing so, Windows users can expand their workspace with up to six 1920x1080 displays using 3 separate adapters, or even build their own quad or triple display setup by combining the device with a single display USB-C dock, promoting even more productivity and efficiency. Moreover, the added portability of the adapters means you can extend your display from wherever you're working, whether that be at home, in an office space or on the road.Please note, we only recommend a maximum of two external monitors if using 4K resolution monitors.

There’s no shortage of options when it comes to adding screens to your laptop, and that’s where things can get complicated (and expensive). The Plugable USB 3.0 and USB-C to HDMI monitor adapter (UGA-HDMI-S) keeps things simple. A one plug solution that adds one HDMI port to your computer, the UGA-HDMI-S leaves your other ports open for peripherals. And because this USB A to HDMI adapter has a single function, it’s a lot more affordable than a docking station.

7-Port USB 3.0 Hub With Two Powerful 1.5A Charging PortThe Plugable 7-Port USB 3.0 Hub with 36W Power Adapter (USB3-HUB7C) expands USB connectivity by enabling up to seven USB 3.0, 2.0 and 1.1 devices to be added to any USB 3.0 or 2.0 capable desktop, laptop, or tablet computer. Supporting standard USB 3.0 transfer rates up to 5Gbps (640MBps) to allow data to move quickly between devices, ideal for high-throughput devices such as USB external hard drives, flash drives, and USB graphics adapters.In addition to the higher-wattage power adapter, this 7-port hub also includes 2 features our customers have repeatedly requested most USB 3.0 hubs don't offer: A fingerprint-resistant matte finish, and a physical on/off power switch to control power to the hub.7 Ports of ConnectivityOn average, most computers have 3 USB ports. With so many devices we depend on daily, that's just not enough. All seven ports are lined up front-and-center for easy access, with the power connection and host USB cable facing rearward to reduce cable clutter.Per-port LED status lights on the top of the hub indicate a successful connection between the device and the host computer.Data Sync and USB ChargingIn addition to standard data transfer and sync, this hub expands on the capabilities of regular USB 3.0 hubs, providing extra power on each edge port (ports 1 and 7). It's a no-compromise solution for gaining extra USB ports and providing power to mobile devices.Standard USB 3.0 ports only provide 900mA for connected devices. The two edge ports are great for power-hungry devices, providing up to 1.5A with special charging signals that enable supporting devices to charge at a much faster rate.Modern ControllerFeaturing the VIA VL813 USB 3.0 hub chipset updated to firmware version 9015 for maximum compatibility with almost all USB 3.0 hosts. It allows for full forward and backward compatibility between USB 3.0, 2.0, and 1.1 hosts and devices.The VIA Labs VL813 USB 3.0 hub chipset is a 4th generation solution which emphasizes high performance and high power efficiency.Installation and CompatibilityThe hub itself requires no driver installation, but attached devices may require drivers. Supports Microsoft Windows 10 through XP, macOS, and Linux kernels 3.0 and later.Installing latest USB 3.0 xHCI host controller drivers is recommended. This hub is not recommended for use with older Texas Instruments, Fresco Logic, Etron, or Wistron USB 3.0 host controllers.Older Mac Pros with USB 3.0 PCI Express add-on cards may not work with this or any USB 3.0 hub.The Apple SuperDrive is not compatible with this or any other USB hub (see Apple HT201788).2.4Ghz wireless devices such as keyboard/mouse receivers, Bluetooth and WiFi adapters, may not work in close proximity to USB 3.0 devices or hubs.

- Connect up to six monitors to any brand of laptop or desktop (one adapter required per monitor)- Plug and play, extensible USB 2.0 connectivity to any VGA, DVI, or HDMI monitor or projector- DisplayLink DL-165 chipset, supports resolutions up to 1600×1200 or 1920×1080 (widescreen)- Windows 8/7/XP drivers installed automatically via Windows Update (Internet connection required)- Mac is not supported due to significant limitations in the operating system.- Linux configuration for advanced users only