Showing 350–360 of 643 results

Designed for a clean installation, RAM-231Z-2U base accommodates most common tubing sizes on UTV's and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. Included in the kit is a zinc coated metal u-bolt, this allowing you to modify the mount to accommodate mounting location. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.

The RAP-B-379U-25201L consists of a 1" diameter rubber ball, connected to a 1/4"-20 X 1" male threaded post. U.S. Standard Thread Diameter and Pitch Option: 1/4"-20 X 1"

The single socket for a C size 1.5" ball that has a socket for Octagon Button products. This configuration gives you the ability to interface with the variety of Octagon Button bases, couplers, and pipe mounts.

The RAM Track Ball is made up of a C size 1.5" rubber ball molded to a high strength composite base, a rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the Track Ball into your track and twist the ball clockwise to tighten in place. Twist counterclockwise to loosen or adjust the ball. T-Bolt Dimensions: .48" x .95"

The RAM Mount RAM-VB-D-110-2U Single Swing Arm with Rotating Plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place.

The RAP-111BU consists of a composite 1.5" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

The stem mount hardware pack provides the hardware needed to install your Fork Stem Motorcycle base on a new bike. The pack includes a rubber expansion plug, plastic washers, lock washers, a screw and nut. This hardware pack allows for installation of the Fork Stem Motorcycle base into the cylindrical bore wall of fork stems that measure from 12 - 33mm (.5" - 1.29").

Blending the best of versatility, strength and installation ease; the RAM POD HD is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM POD HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be removed quickly without the use of tools. The versatility of the RAM POD HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet.

The RAM-101U-B-SPX1 consists of a triple 3.3" suction cup locking base, SHORT length double socket arm and 4.75" square plate with the VESA hole pattern. The triple suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The VESA plate contains a 75mm X 75mm and 100mm X 100mm hole pattern. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm.

The RAM-109-1ATU is a straight 6" long arm extension for the RAM 109 series. This arm includes a 4" long bolt, washers and tightening knob.