Showing 0–10 of 425 results

The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 9.5" to 11.75" maximum Width: 6.375" to 8.25" Depth: 0.13" to 1.1" Note: Product consists of holder only. Case not included.

Well thought out and compact designs are common place at RAM and our new RAM Tough-Tray II is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPC's, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM.

The RAM-VPR-101 is designed to hold Brother PocketJet Series portable printers. A custom fit enclosure, the cradle is form fitting with no sharp edges and adds little to the overall size of the printer. Key features are full view of LED's, sight hole to check paper level, and a caddy to store pens, cell phone, paper clips, glasses and other useful items. Complete kits are available as stand alone systems or integrate one with your existing RAM products.

The RAM-HOL-UN9U consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip. The X-Grip cradle is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25"

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four side clamping arms with rubber grips to keep your laptop secure in any rugged environment. These arms can be moved both vertically and horizontally, allowing a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

The RAM-VPR-101-1 is designed to hold Brother PocketJet Series portable printers. The cradle uses a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle are small side clamp plates that are designed to fit cleanly around either edge of the printer. Included is a standard length arm and round pipe base, which will connect to any RAM Tele-Pole and other poles with a diameter from 1.25" to 1.88".

The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.