- Valcom 6 digit, 4 inch double sided digital PoE clock- Easy to install via RJ45 connection- Power over Ethernet (IEEE 802.3af)- No master clock required set automatically by NTP (Network Time Protocol)- 10/100BaseT Ethernet compatible- DHCP or static IP addressable- Industrial grade metal housing
- Valcom networked page zone extender- Enables voice accessto a single zone of one-way paging over an IP-based LAN/WAN (this allows page zone extension anywhere on the network)- 1 Audio output- 1 Audioinput- 2 Programmable form C relay closures- RJ-45 for network connection- No server required- 1 to 11 Digit dial plans- Easy Windows based setup- AUX Audio input- Contactclosure available for: audio indication and door unlocking- Protocols DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP- Voice Algorithm: G.711 (64kbits/s)(ulaw) / echo suppression- Voltage: 24 Vdc @ 250 mA; IEEE 802.3af compatible, class 3 device; regulatory: FCC Part 15 Class A- Input: analog device interface (600 ohm input impedance, VOX and contact closure input)- Output: analog output interface (less than 50 ohms output impedance; frequency response: 200 Hz - 3400 Hz; relay closure available)- Does not include power supply (see VC-VIP-324)
InformaCast, InformaCast CKHTTP Interface for Status & Configuration1 Audio Output1 Relay Contact Closure OutputRJ-45 Jack for Network ConnectionFront Panel Activity LEDProvides Audio for Up to 40 Valcom One-way Amplified Speaker AssembliesOutput Control Contact Closure Provided During Paging OutputCompatible with 25 or 70 Volt Amplifiers2.5mm Jack for External DC Power (Optional)Power Over Ethernet 802.3af Compatible
- Valcom IP Intercom- SIP doorphone with door/gate relay- For use with Cisco, Nortel, Avaya, and most modern IP telephone solutions- Call button calls any SIP address or any Valcom Gateway- Automatic talkback VOX operation- Includes long line extender - up to 300 meters- Easy, RJ45 plug in, Cat 5 or 6, LAN/WAN 10/100- Stainless steel- For security - peer to peer or many to one- Companion to IP CCTV cameras- SIP or multicast softphone adressable- Door ajar notification feature- All call 1000's of unites with Valcom Gateway- LED Status indicator- Weather resistant and tamper-proof- Compatible with secure - Supervision with alert functions- Web-based firmware upgradeable- Web interface for control and setup- DHCP- High survivability - no servers needed
- Valcom enhanced networked station port- Enables 1 telephone to engage in paging and phone to phone communications over an IP-based LAN/WAN- 1 FXS port - 2 Programmable form C relay closures - Provides caller ID - No server required - 1 to 11Digit dial plans - Easy windows based setup - AUX Audio input - Contact closure available for: audio indication, door unlocking , ringing indication- Protocols DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP - Voice Algorithm: G.711 (64kbits/s)(ulaw) / echo suppression- Voltage: 24 Vdc@ 250 mA; IEEE 802.3af compatible, class 3 device; regulatory: FCC Part 15 Class A - Station port: 4 REN, CID enabled- Relays: 2 form-C contacts (24 Vdc, 2 amps)- Does not include power supply (see VC-VIP-324)- VALCOM POWER UNITS (-5)
- Allows most loop start terminal devices to be connected to a managed IP-based LAN/WAN - RJ-45 for network connection- 1 RJ-11 FX0- 1 RJ-11 telephone failover connection- Front panel activity LED- Network activity LEDs- 2.5mm jack for DC
- Matching Transformer Line Input- Used as an input-matching transformer, it connects telephone systems to most public address amplifiers, for telephone paging. In addition it functions as an output-matching transformer to feed program material over a 600-ohm telephone line for "music-on-hold". It is compatible with any amplifier having a 25V output connection.- Hi-Z, 10k-ohm primary impedance- Lo-Z, 600-ohm secondary impedance, balanced with center tap- Matches high-to-low impedance or low-to-high impedance- Adapts line level signals to microphone inputs- Phono jack or screw terminatls for Hi-Z side- Screw terminals for Lo-Z side- Steel enclosure w/mounting ears allows easy mounting
- Easy To Install- Multiple Simultaneous Pages- Live or Recorded Messages- 65,000 Speakers, Expandable To 256 IP Paging Zones- Easily Connect Loudspeaker System To Existing Computer Networks- Compatible With Cisco, Nortel, Avaya, Iwatsu And Most IP Telephone Systems- Supports IP And Analog Amplified Speakers- Supports IP Talkback Speakers- Supports Legacy Paging Systems- Synchronized Clock Compatibility- PoE (802.3af) Or Local Power- SIP And Multicast- Feedback Eliminator- DHCP
1 Audio Input2 Audio Outputs (VIP-851-25)3 Audio Outputs (VIP-851-25/70/110)1 Form C Relay1 SIP identity for registering to a VoIP telephone systemPower over Ethernet 802.3at (PoE+) compatibleFront panel activity LEDFront panel PoE+ Fault indicatorFront panel Supervision Fault indicatorProvides line level audio for up to 40 Valcom one-way amplified speaker assembliesContact closure or VOX operation of audio inputRemovable screw terminal connectors provided for audio and relay interfacesAUX input music mutes during pageBarrel jack for optional DC power
- Valcom clock control card for use with the V-2928 option card- Provides clock control for synch wire correction, two-wire digital correction and wireless correction when used with additional equipment
Note: Search results and information may differ as they are provided by a third party.
In Stock*: Product stock is updated from the last business day and can change.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
