Showing 100–110 of 375 results

- Elevators- Parking ramps/lots- Pools- Automated Tellers (ATM)- Area of refuge locations- Lobbies- Entryways- Roadside emergency stations- Stadiums- Convention centers- Campus Security Sites- Entryways- Stairwells in Public Buildings- Enhanced Weather Protection (EWP) EWP products are designed to meet IP66 Ingress Protection Rating see DOD# 859- Meets ADA requirements for Emergency Phones: - Can automatically light the �Call Connected� LED for the hearing impaired - Transmits a unique location I.D. code or voice announcement - Grade 2 Braille label for the visually impaired- Non-volatile digital voice announcer with 16 seconds of voice memory- Provides contact or switched 12V DC for controlling a strobe light- Advanced call progress detection- Handsfree operation- Phone line powered emergency phone (LDB-3 requires power)- Non-volatile memory (no batteries required)- Marine grade 316 stainless steel prevents corrosion- Dials up to 5 emergency numbers- Cycles through backup emergency and non-emergency numbers on busy or no-answer- Hangs up on CPC silence busy signal dial tone time-out or touch tone command- Programmable to auto-answer on incoming calls- Remotely programmable- Extended temperature range (-15�F to 130�F)- Central Station Monitoring capability (dials 2 numbers)- Separate central station voice speed dial number- High visibility vandal and weather resistant- Phone Power: Telephone line powered (24V DC/20mA min)- LDB-3 Control Module: 120V AC/12V DC 500mA UL listed adapter provided- Mounting: Flush mount to Talk-A-Phone ETP towers wall mounts boxes and pedestals- Environmental: -26�C to 54�C (-15�F to 130�F) with 5% to 95% non-condensing humidity- Material: .125� (11 gauge) brushed stainless steel- Connections: Color-coded wires with gel-filled butt connectors

-Large 10-inch diameter horn-Fully adjustable mounting hardware included-Quick and easy installation-SIP compliant-PoE powered (class 3

Provide 4 Door Entry Points & Keyless Entry (or Optional Card Readers) for up to 250 Apartments or OfficesRS-232 Port for programming via a PCRemote or local Touch Tone programmableSupports 4 entry pointsSupports 4 Wiegand type card readersCompatible with Viking�s vandal resistant K-1700-3 K-1900-8 or any Touch Tone phoneNon-volatile memory (no batteries required)Stores 250 tenant Touch Tone phone numbers and 250 entry codesProgrammable tenant�s relay activation codeProgrammable Master entry code & Maintenance Personnel entry codesProgrammable call timerNormally open and normally closed relay contacts for controlling door strikes magnetic locks gates etc.Touch Tone toll restrictionAllows 911 and 311 outside calls (Programmable)LOG BUS data output for logging entry events

- Viking calling party control - generate CPC disconnect signals on four separate phone lines - Phone line powered (no AC needed)- Handle 4 lines in 1 unit- Generates CPC disconnect on: Return to dial tone (programmable) Busy signal Reorder (fast busy) Steady silence (programmable)- LED shows: In use Audio detected Generated CPC signal- Caller ID compatible - Power: Telephone line powered (20VDC 20mA minimum)- Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")- Shipping Weight: 1.13Kg (2.5 lbs)- Environmental: 0� C to 32� C (32� F to 90� F) with 5% to 95% non-condensing humidity- CPC Disconnect Time: 1 second nominal- Connections: 4 position screw terminal block - VKCPC4

EWP products feature foam rubber gaskets and boots sealed connections gel-filled butt connectors as well as urethane or thermal plastic potted circuit boards with internally sealed field-adjustable trim pots and DIP switches for easy on-site programmingSelf diagnostic reports via email (testing com mic speaker & switch)Automatic polling and programming software includedSIP compatible (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 1

- Optional door return hinge spring available to assure door is closed after use.

- Viking Door Entry Control for 4 Entry Phones Provides CO Sharing Call Waiting and One Aux Contact- Allows an entry phone to share a single telephone line with a residential or business telephone system- House phones ring with C.O. line cadence or distinctive ring when the entry phone �Call� button is pressed- Compatible with these Viking entry phones: - E-10 E-20A E-30 E-40 Handsfree Phones - K-1500-7 Stainless Steel Panel Phone - Or use with any analog touch tone phone- Provide entry phone activated chimes and whole house paging when used with Viking model SLP-1- Produces double �Call Waiting� tones- One set of normally open and normally closed contacts available for operating a doorbell camera lights etc.- Add door strike capability with the Viking model RC-2A Remote Touch Tone Controller

Simple on-off toggle switch mounted in a convenient plastic caseUsed with Viking products that have a �Night Switch� input or any product that requires an external switch closureCompact size mounts anywhereRugged switch with flat actuatorFoam tape for quick mountingQuick connectors for easy wiring

Self diagnostic reports via email (testing com mic speaker & switch)Automatic polling and programming software included2 Amp relay contacts for door/gate or SL-2 strobe light controlSIP compatible (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 1

Self diagnostic reports via email (testing com mic speaker & switch)Automatic polling and programming software included2 Amp relay contacts for door/gate or SL-2 strobe light controlSIP compatible (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 1