- Up to 525 tenants- Up to 32 entry points are possible- Logs up to 1024 entry events- Two wire CAN communication protocol can be daisy-chained together- Share with door strike's 12-24 Volt AC or DC power source- Inputs may be either normally open (NO) or normally closed (NC) contacts- Relay outputs may provide either normally open or normally closed contacts- One year warranty- Made in the USA
- SPECIAL ORDER- Viking Emergency Voice Module Plays on Remote Answer or Touch Tone- Telephone line powered 10 seconds of digital record time- Non-volatile memory (no batteries required)- Locally or remotely recordable with a Touch Tone phone- One year warranty
- Operates on 12 to 24 volts AC/DC- 12 speed dial buttons (each up to 32 digits)- 12 second number positions (each with 32 digits)- One button operation (no call button)- Hang-up on CPC busy silence time-out or dial tone return- Touch Tone restriction from microphone- Integral relay for camera control or door strike- Works with C-1000B for increased security- Works with C-3000 for �No CO� operation- Optional Enhanced Weather Protection (EWP)- VE-LIGHT compatible
- Viking hotline dialing card- 20 digit programmable speed dial number - Touch Tone and 10/20 pps pulse dialing - Operates on standard C.O. lines Centrex lines or analog stations behind key systems and PABX's - Non-volatile E2 memory (no batteries required) - Won't dial on incoming calls - Programmable security code - Touch Tone programmable - One year manufacturer's warranty
- Vandal Resistant Features:- 12 gauge (0.105" thick) 316 stainless steel front panel- Permanent laser etched graphics- Metal handset cradle- Armored handset cable with internal stainless steel lanyard- Hex drive mounting screws- Weather Resistant Features:- Marine grade 316 stainless steel faceplate- Marine grade 316 stainless steel hex drive screws- Gaskets (on EWP models)- Auto dials one programmable speed dial number (up to 32 digits)- Touch tone or pulse dialing- Non-volatile memory (no batteries required)- Operates on analog PABX and key system extensions or analog Centrex and CO lines- Programmable 6 digit security code- Touch tone programmable- 12� armored handset cable with internal stainless steel lanyard for added strength and vandal resistance- Programmable pre-dial pause- Blocks fraudulent calls from hand held pocket dialers- Hearing aid compatible amplified handset with sealed ��push button volume control- Programmable default volume level- Programmable volume control disable- Flush mount using a standard double-gang box (not included)- Surface mount using an optional VE-5�10 surface mount box (not included see DOD 424)
- Mounts to a standard single gang box- Mounts directly to the wall- Surface mounting the E-10A E-30 E-30-PT E-35 E-1600-20A W-1000 or W-3000- Attaching the E-10A E-30 E-30-PT E-35 E-1600-20A W-1000 W-3000 or W-3005 to a VE-GNP or VE-GNP-2 gooseneck pedestal
- Single Viking 1600A Series elevator emergency phones (DOD# 215)- Add to the Viking model LC-6 (DOD# 245) for use with banks of two to six 1600A Series elevator emergency phones- Complies with ASME A17.1 Elevator Code- Compatible with Viking 1600A Series phones- Compatible with Viking Model LC-6 Six Port Line Concentrator- Volume adjustable audible signaling- Mounts in standard double gang electrical box- Power: 120V AC/ 12V DC UL Listed adapter provided- Dimensions: 124 mm x 124 mm x 33 mm (4.9� x 4.9� x 1.3�)- Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% noncondensing humidity- Maximum Power Supply Wire Length: 244m (500 ft) with #24 gauge wire- Connections: (6) color-coded wires with (6) gel-filled butt connectors
- Programmable as a single number hot-line dialer or a multi-number dialer- Stores up to 100 32-digit phone numbers- Non-volatile E2 memory (no batteries required)- Local or remote programmable with a standard Touch Tone phone- AC power allows installation on nearly any analog line- Touch Tone dialing with normal or high speed settings- Increased toll restriction (programmable on/off)- Ring thru mode allows you to call the phone connected to the dialer- LED status indicator- Push button security code override- Allows 911 dialing- Single number alarm dialer mode- Programmable call timer
- Ring with adjustable volume and cadence- Hearing aid compatible amplified handset with thumbwheel volume control- Optional RC-4A for secure remote relay control see DOD 582- SIP compliant- PoE powered (class 1
- Viking economical and vandal-resistant hot-line phone- Programmable 1- 32 digit telephone number each time the phone's handset is lifted- Products may be programmed to touch tone or pulse dial and will not dial on incoming calls- Available in desk or wall chassis as well as in a vandal resistant panel phone configuration- Network insert dialer also available to convert standard phones into hot-line phones- Telephone line powered- Hearing aid compatible amplified handsets- Rotar handset volume control- 1 -32 digit speed dial number- Touch tone and 10/20 pps pulse dialing- Non-volatile E2 memory (no batteries required)- Restricts fraudulent calls from hand held dialers- K-1900D/W-2 available in red or ash- Optional Q170600 ringer (Fax Back doc 845)- Operates on a CO line or analog PABX/KSU extensions- Ring detection (will not dial on incoming calls)- Programmable security code to enter programming mode- Touch tone programmable K-1900-6 fits standard 500 554 2500 and 2554
Note: Search results and information may differ as they are provided by a third party.
In Stock*: Product stock is updated from the last business day and can change.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
