The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access. The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys. Fast dual-channel performance is offered on KP200 drives with 512GB and on KP200C drives with 64GB-512GB capacities.The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems. With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.Fast dual-channel performance is offered on KP200 drives with 512GB and on KP200C drives with 64GB-512GB capacities.FIPS 140-3 Level 3 (Pending) certifiedKP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.OS and device independentWith KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems. Multi-PIN optionUsers have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.Global and Session Read-Only (write protect) modes Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.
PNY 69Q04127 NVIDIA L40 Cec for Liqid
PNY 69Q04125 NVIDIA L40S Cec for Liqid
PNY 69Q04126 NVIDIA H100 for Liqid
Data Storage for Machine: FUJIFILM LTO DATA TAPES
Fujifilm LTO Ultrium 6 media is the latest midrange data storage product to use Fujifilm's advanced NANOCUBIC coating process.At a GlanceFujifilm LTO Ultrium 6 media is the latest midrange data storage product to use Fujifilm's advanced NANOCUBIC coating process, which incorporates three Fujifilm proprietary technologies:- Nano-particle Technology: Finer particles (30% smaller than metal particle used on LTO-5)- Nano-dispersion Technology: Uniform particle dispersion by applying high-dispersed binder.- Nano-coating Technology: Improved ultra-thin layer coating to realize an even thinner magnetic layer.FeaturesExcellent read/write property: By adopting Barium Ferrite, Fujifilm LTO Ultrium 6 cartridge has higher coercivity, lower noise compared to older generations. Over time, the recording head of a well-used drives start to wear down leading to a drop in performance. However, since Fujifilm’s LTO Ultrium 6 cartridge with Barium Ferrite, from a system performance point of view, has more margin compared to metal particle tapes (measured using Fuji manufactured tapes), it can be read/written more accurately on these older drives.- Long Archival Life: Barium Ferrite is chemically stable (already oxidized) and does not easily get demagnetized by outside energy. Therefore magnetic tape using Barium Ferrite is said to have a longer archival life of more than 30year based on Fujifilm’s acceleration tests.- Larger Cartridge Memory: Fujifilm LTO Ultrium 6 cartridges offer more space to record specific cartridge information, with the introduction of a 16K Cartridge Memory (IC chip). This feature allows the user to record mount history and easily monitor the cartridge health.- Compatibility: LTO Generation 6 hardware will be backward read/write compatible with LTO Ultrium 5 data cartridges and backward read compatible with LTO Ultrium 4 data cartridges.As with the previous generation, LTO Ultrium 6 hardware will incorporate the Advanced Encryption Standard (AES) and Linear Tape File System (LTFS) dual partitioning functionality.NANOCUBIC thin-film coating process to reach the higher capacity and quality levels currently only found in enterprise-class systems.The LTO technology is a powerful, scalable, adaptable open tape format developed and continuously enhanced to help address the growing demands of data protection in the midrange to enterprise-class server environments. In addition, LTO Ultrium 5 technology offers AES 256-bit encryption capability that increases the performance value of tape storage in terms of security, and reinforces its importance as a reliable high-performance storage solution.
Kingston’s DataTraveler® Generation 4 (DTIG4) USB Flash drive features USB 3.0 for quick and easy transfers of music, video and more. Its practical design and fashionable colours make it ideal for everyday use at work, home, school or wherever you need to take your data.It’s backwards compatible with existing USB 2.0 ports, allowing 2.0 users to migrate to 3.0 in the future without replacing their drive.
Note: Search results and information may differ as they are provided by a third party.
In Stock*: Product stock is updated from the last business day and can change.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
