Showing 11150–11160 of 15331 results

- Valcom IP horn- 117db/1 Meter - Interior or exterior - PoE (802.3af) - no local power required - Very high-efficiency ensures penetration with lower energy consumption - Weather-resistant - L Versions include long line extender for cabling up to 1200 feet

- 4 audio outputs or inputs- 4 form A relay contacts- 4 contact closure inputs- 4 SIP indentities for registering to a VoIP telephone system- RJ-45 jack for network connection- Front panel activity LED- Provides audio for up to 40 Valcom one-way amplified speaker assemblies per zone- Output control contact closure provided during paging output- Contact closure or VOX operation of audio inputs- VM-186 RJ-45 connector provided for audio and relay interface- Page with music output music mutes during page- AUX audio input via RCA jack- Compatible with 25 or 70 Volt amplifiers- 2.5mm jack for optional DC power- Power of Ethernet (PoE) 802.3af compatible

- Valcom enhanced networked station port- Enables 1 telephone to engage in paging and phone to phone communications over an IP-based LAN/WAN- 1 FXS port - 2 Programmable form C relay closures - Provides caller ID - No server required - 1 to 11Digit dial plans - Easy windows based setup - AUX Audio input - Contact closure available for: audio indication door unlocking ringing indication- Protocols DHCP IGMP v3 UDP TCP HTTP Telnet FTP - Voice Algorithm: G.711 (64kbits/s)(ulaw) / echo suppression- Voltage: 24 Vdc@ 250 mA; IEEE 802.3af compatible class 3 device; regulatory: FCC Part 15 Class A - Station port: 4 REN CID enabled- Relays: 2 form-C contacts (24 Vdc 2 amps)- Does not include power supply (see VC-VIP-324)- VALCOM POWER UNITS (-5)

-RJ-45 for network connection4 RJ-11 FXO connections4 RJ-11 failover telephone connectionsDecode caller ID signalsFront panel activity LEDNetwork activity LEDs2.5mm jack for DC power802.3af compliant

- Used for V-2952 FM tuner and V-9970 station adapter only- 12 volt DC unfiltered power supply- Input thermal fuse protected- Floating output- Receptacle mount

- Valcom .6 amp/24V power supply- Smaller footprint- Wall rack/rail mountable- Mounting bracket included- 100 - 240V- Less energy/ less heat- Barrel or wire connection- UL/C and CE

- Valcom battery back-up power- Provides a battery source to permit system operation in the event of an AC power failure- Use with V-2001A V-2003A V-2003AHF V-2006A V-2006AHF page controls- Fuse-protected AC input current limiting on output- Connects directly to battery back-up molex connector on compatible equipment- 12 and 24 volts DC fused at 3 amps- Battery test switch and power on LED- UL CSA

- Wire cage for horn- Indoor or outdoor use- Bright zinc plated- Heavy 3 gauge wire construction- Convenient mounting tabs

- Valcom ceiling speaker assembly- Flush mount- 8" 5 Watt speaker- Combination 25 70V transformer- Scratch scuff and nick resistant- Attractive white powder epoxy finish

- Valcom Clarity general purpose ceiling speaker- Scuff scratch and nick resistantIncludes built in volume control and knob Attractive white powder epoxy finish- Operates on 25 or 70 volt speaker lines- 5 Watt- 8 Inch speaker- 5 oz. Magnet- Frequency response 65Hz to 17kHz- SPL: 95dB 1W @ 1 Meter