- Connect to the SL2100 system via a Local Area Network using cat5 cat6 or cat7 cable- AP400 IP-DECT Wireless Access Point (DAP) Provides wireless telephony to IP networks- For C124 G355 G955 G266 G566 and i755 IP DECT Handsets- Supports up to (11) simultaneous calls- Equipped with internal omni-directional antenna- Configuration requires DAP Manager Software which must be downloaded from the NTAC Website- Can be wall or ceiling mounted (Horiz. or vert.)- For indoor installation only- Maximum 250 DAPs per system- Powered by PoE from a PoE switch or a PoE injector
- Appealing design lightweight and slimline- Bright 2-inch high resolution display- Large SOS-key for personal safety- Drop resistant design and IP65- Rugged belt-clip- Voice alarming messaging and location services- Central directory and presence- Simple plug-and-play with MicroSD card- Very long battery life and standby time- 4 function (line-) keys- Location services- Many call control features seamlessly integrated with the PBX- Mobile staff interaction in various demanding environments- Valuable unified communications including central directory access presence and extensive messaging and alarming features- Dedicated programmable keys with LED indication- Intuitive user interface with colour display and icon-based menus- Single or dual charger allowing additional battery charging; compatible with previous generation chargers- USB-C interface- Options such as Bluetooth - or wired headset and built-in trembler- High-definition audio
- SL1100 12-Button Full Duplex Tel (Black)- Digital 12 Button Black Proprietary Telephone- Backlit 3 line 24 character display - 2-Step adjustable angle- Programmable keys with red/green LEDs- Backlit dialpad 4 Soft keys - 9 Fixed feature keys - Navigator key - Headset port- Full duplex speakerphone- 20 number personal directory- 1000 number system/group directory - Dual-color call indicator lamp- 8 Selectable ring tones- Power saving sleep mode- Do not disturb - Call forwarding - Mute - Flash - Hold - Headset jack - 9 Foot handset cord
- 24 PoE+ 10/100/1000 Ethernet Ports (can connect to IP phones and other PoE devices that require up to 30W)- 4 Gigabit SFP Uplink ports- Support for L2 forwarding QoS Security Multicast & VLAN- CLI and webGUI management console
- (8) VoIP channels- (4) ports of InMail/VRS with (2) InMail storage hours- (4) Mobile Extension Clients- Telephony Resources � for DTMF Dial Tone/Busy Tone detection and FSK Caller ID receiver/sender- Tone Sender � for system tones and DTMF- Conference Resources- Contains:- Ethernet port (RJ45)- Connector for VoIP Daughter Board (VOIPDB) � required for additional VoIP channels (up to system max of 128)- Connector for Expansion Card (EXIFB)- Connector for SD card (for additional InMail storage)- Slot for memory backup battery (CR2032 included)- Installs in dedicated CPU/EXFE slot in Main Chassis
- Provides (16) VoIP channels � when more than the (8) built-in VoIP channels are required- Allows addition of VoIP channels � in increments of (16) up to the system maximum of (128)- VoIP channels are used for IP telephones IP trunks and IP networking- Additional VoIP channels require VoIP Channel Licenses (see below)- Equipped with gigabit port (RJ45 8-conductor jack)- Installs in dedicated connector on CPU card
- Provides interface for (8) analog stations- Equipped with (4) 8-conductor interface jacks- Installs in any universal slot of Main or Expansion Chassis- Allows addition of (1) 3-Port CO Trunk Daughter Board (3COIDB) or (1) PRI Daughter Board (1PRDB)- Maximum (4) per Main or Expansion Chassis- Maximum (12) per system
- Allows addition of (1) 3-Port CO Trunk Daughter Board (3COIDB) or (1) PRI Daughter Board (1PRDB) when system has fewer station cards than CO Trunk/PRI Daughter Boards- Only required for system configurations with fewer station cards than CO Trunk/PRI Daughter Boards- Installs in any universal slot of Main or Expansion Chassis
- (24) User Programmable Function Keys- Full-duplex Hands-free speakerphone- Backlit 3-line/24-character display- Dialpad (not backlit)- User Programmable Function Keys with Red/Green LED�s- (4) Soft Keys- Navigator Key- Tri-color (Red/Green/Orange) Call Indicator LED- 2-Step Leg Angle Adjustment- Headset Jack- 9-Ft handset cord
- VoIP NEC I-SIP Multi-Line Telephone for SL2100- Supports Ethernet Gigabit Speed (Full Duplex)- 8 Programmable Keys Visible at a Time (May Scroll Up to 32)- Programmable Button Labels- Powered via POE- Full Duplex Speakerphone- Extended-size Message Wait and Call Indicator LED with up to 7 different colors- 3.5 Inch Color Display- Self-labeling Programmable Function- 5 Position adjustable leg assembly- Multi Key to scroll through (4) 8-button screen pages- Soft keys- Red Color LED- Menu button for local Setting and Configuration- Incoming Call History Icon- Directory Functions Icon- Redial History Icon- Menu Cursor Keys
Note: Search results and information may differ as they are provided by a third party.
In Stock*: Product stock is updated from the last business day and can change.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
