Showing 60–70 of 94 results

Infinium Splice-On connectors by Legrand enable fast field terminations while meeting or exceeding industry standards for performance. The entire splice is concealed and protected within the strain relief boot and the UV Cure Protection sleeve cures in seconds, reducing the variables that cause critical errors during installation, so you can finish the job quickly and efficiently. Legrand 3.0mm Splice-On Connectors have a unique boot that allows the entire splice to be concealed and protected. The addition of an extended brass crimp sleeve provides extra protection to the splice and utilizes the Kevlar for maximized pull strength.

Legrand pre-polished keyed LC multimode and single-mode connectors provide the same ease of installation and high-quality performance as our line of standard LC pre-polished connectors. Up to twelve keys/colors of connectors are possible with unique physical keying configurations.

Legrand quick-cure, anaerobic epoxy field-installable connectors speed installation time. Strip the fiber, inject the adhesive into the connector, insert and scribe the fiber, then polish the connector end face to perfection for a high performance termination.

Legrand quick-cure, anaerobic epoxy field-installable connectors speed installation time. Strip the fiber, inject the adhesive into the connector, insert and scribe the fiber, then polish the connector end face to perfection for a high performance termination.

Better Insertion Loss & Return Loss Performance:: Support high-bandwidth/high-speed transmission to 25G, 40G and 100G applicationsFactory-cleaved, pre-polished 900-micron fiber stub: Provides a quicker terminationAvailable in LC, SC and ST, Single-Mode or Multimode: Multiple connector types available900-micron boot conceals and protects the splice: Enables better cable managementUV Cure Protection Sleeves: Strain relief boot protects the splice point3mm Version: 3mm boot protects splice for easy cable management3mm Version: Brass crimp to protect splice3mm Version: Tubing insert to accommodate 1.6/2.0/3.0 cordageFiber endface types: Endfaces available in PC, APC and UPC

Using a factory-terminated and pre-polished connector, this Splice-On Connector (SOC) provides a connection that meets or exceeds industry standards for loss and back reflection. The Connector is provided with a factory-cleaved 900um fiber stub to ensure ease of use and optimal performance.