Showing 90–100 of 397 results

This adapter will let you connect older serial devices to modern computers, for terminal services, data transferring, remote control, and programming. Supports baud rates from 75bps to 12Mbps, multiple stop bit and parity types.Connect legacy RS-232 serial devices to any modern computerPlugable's USB to Serial Adapter features Prolific's PL-2303HX Rev D chip for the best combination of support and performance with a wide range of RS-232 serial devices. Drivers are built-into Windows 11, 10, 8.x, 7, and most Linux distributions, drivers are available for Windows XP, Vista, and macOS.Connect legacy RS-232 serial devices to any modern computerThis adapter replaces a legacy built-in or PCI serial port and features a fixed male port with screw in connection. For connecting devices that also have a male connector an inexpensive DB9 coupler or standard serial cable can be purchased separately.CompatibilityWorks with devices with RS-232 serial ports such as other PCs with RS-232 ports, Bluetooth serial adapters, telescopes, amateur radio gear, GPS receivers, routers, firewalls, modems, plotters, embedded character displays, scan tools, sonar units, embedded boards and many others. Specific devices include: Garmin eTrex GPS, Seiko Label Printer, iRobot Create, Cisco products with serial consoles, US Robotics Modems, NexStar telescopes, Equus Scan Tools, Uniden Hand Held Scanners, etc. Works with software like: HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc.GenuineWe use only genuine Prolific serial chipsets in our adapter. Some inexpensive serial adapters use cloned Prolific serial chipsets that will not work with the latest Prolific drivers, both those available for download and the drivers embedded in Windows. Because we only use genuine Prolific chips, our adapter is always compatible with the latest drivers from Prolific.

Add an RS-232 null modem serial port to a laptop or desktop, using an available USB-A portAdd RS-232 DCE serial communications support to a desktop or laptop computer and resolve DCE/DTE conflicts directly without the need for additional cross-wired serial cables or adapters.Serial Port ExpansionThe 6.6-foot (2-meter) Null Modem USB Serial Adapter adds an RS-232 serial DB/DE-9 (female) connector to a desktop or laptop via a USB Type-A port. Secure the adapter to a serial device, using pre-installed and removable slotted D-Sub thumbscrews or install the included DB-9 Nuts for compatibility with other serial peripheral devices or cables.LED IndicatorsData transmission and reception LED indicators on the adapter provide real-time monitoring of port activity. The USB LED indicates when the adapter has successfully enumerated on the desktop or laptop. All the LEDs aid with diagnostics and troubleshooting.Seamless ConnectivityThe adapter is compatible with Windows, macOS, ChromeOS, and Linux. Drivers automatically install to Windows 7 and newer versions, macOS 10.15 and above, and Linux. The USB to RS-232 adapter features COM retention, which automatically reassigns the COM port value if the cable is disconnected and reconnected, or if the system is rebooted.Built To LastThe rugged TPE construction and Level-4 ESD protection (15kV air and 8kV contact) enhance the reliability and longevity of the USB to Serial Adapter. Copper shielding minimizes Electromagnetic and Radio Frequency Interference (EMI and RFI). Gold-plated connectors enhance signal conductivity.The StarTech.com Advantage

With DB9 extension cables from Cables To Go, you will no longer sacrifice convenience when it comes to the placement of computer peripherals in your work area! Let us give you the flexibility to extend an existing piece of hardware wherever you need it. Our DB9 extension cables can extend your existing connections or replace the cables that restrict you. Each extension cable comes fully shielded to prevent against unwanted EMI/RFI interference, and its fully-molded design delivers excellent strain relief.

Add an RS232 serial port to a laptop or desktop, using an available USB-A portAdd RS-232 serial communication support to USB-A enabled Data Terminal Equipment (DTE - e.g., desktop or laptop), using this 6.6-foot (2-meter) straight through USB to Serial Adapter Cable.Serial Port ExpansionThe USB Serial Adapter adds an RS-232 serial DB/DE-9 (male) connector to a desktop or laptop via a USB Type-A port. Secure the adapter to a serial device, using pre-installed and removable slotted D-Sub thumbscrews or install the included DB-9 Nuts for compatibility with other serial peripheral devices or cables.LED IndicatorsData transmission and reception LED indicators on the adapter provide real-time monitoring of port activity. The USB LED indicates when the adapter has successfully enumerated on the desktop or laptop. All the LEDs aid with diagnostics and troubleshooting.Seamless ConnectivityThe adapter is compatible with Windows, macOS, ChromeOS, and Linux. Drivers automatically install to Windows 7 and newer versions, macOS 10.15 and above, and Linux. The USB to RS-232 adapter features COM retention, which automatically reassigns the COM port value if the cable is disconnected and reconnected, or if the system is rebooted.Built To LastThe rugged TPE construction and Level-4 ESD protection (15kV air and 8kV contact) enhance the reliability and longevity of the USB to Serial Adapter. Copper shielding minimizes Electromagnetic and Radio Frequency Interference (EMI and RFI). Gold-plated connectors enhance signal conductivity.The StarTech.com Advantage

The ATEN UC485 is a high quality industrial adapter designed to instantly add an RS-422/485 port to your PC or laptop via a USB port. The adapter is powered via the USB connection without needing an external power supply.The UC485 adapter lets you use a single USB connection to create plug-and-play serial transfers without additional cables or complicated device installations. It lets you connect any RS-485 or RS-422 device to your computer's USB port, without experiencing computer lock-ups, I/O or driver problems. It is the ideal solution for connecting industrial devices such as laboratory machines, measuring equipment, automated systems, monitoring devices, and many more – where mission-critical applications are required.