Showing 2520–2530 of 10083 results

The RAP-351-2U consists of a 1.5" Ball with a screw for connecting to any Tough-Claw components. Ideal for upgrading your Tough-Claw from the smaller 1" Ball, this component will allow your Tough-Claw system to support more weight and will be more suitable for rugged environments.

The FWD™ Dual Swing Arm Flat Panel Wall Mount provides a broad range of motion for viewing small flat panel TVs, LCDs and monitors from multiple angles.Features:-VESA® compliant (75 mm / 100 mm). Interface brackets available for non-VESA® compliant displays. -Ships assembled -Easy installation - Attach wall plate to single stud. Attach display to mount. Slide mount onto plate. Secure hardware. -Sleek, attractive design hides all hardware -Smooth pitch adjustment 15 º up, 15 º down by hand. Gravity-centered Pitch self-adjusts to securely hold different display weights. -Independently adjustable tension at pivot points for customized control. Tension can be optimized for touch screen use. -Independently adjustable tension at pivot points for customized control. Tension can be optimized for touch screen use. -Quick, easy cable management

This Supermicro 2U-5U Rail Kit (MCP-290-00058-0N) has a short quick inner and outer rail release. The rail kit is compatible with various Supermicro chassis and can extend up to 27" in length. This Supermicro rail kit has been fully tested and validated by Supermicro to ensure the best quality. This rail kit includes*: Inner Rail: 1 x MCP-290-00116-0N Outer Rail: 1 x MCP-290-00114-0N

The ThinkCentre Tiny VESA Mount is a unique design specific to house the Tiny PC while featuring the universal VESA mount configurationThis versatile mounting device can be used separately or combined with other options for secure mounting functionality

A Worthy Freezer 7 Pro Successor: Better Price – Better PerformanceThe ARCTIC Freezer 7 X CO is a compact CPU cooler with one 100mm fan. It is multi-compatible with common Intel® and AMD® sockets. Due its dual ball bearing it is optimised for Continuous Operation. The Freezer 7 X CO benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimized for high static pressure, ARCTIC was been able to significantly improve the Freezer 7 X CO's cooling performance.Compatible with Intel® and AMD® SocketsThe Freezer 7 X CO is compatible with all current desktop sockets from Intel® and AMD®. By using the mounting frame, simple installation is possible without a need to remove the mainboard.Pre-Applied MX-4 Thermal PastePre-applied, high-performing MX-4 thermal paste ensures quick and clean assembly.More Efficient and Whisper QuietIn addition to operating more quietly, even at maximum speed, the Freezer 7 X CO built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.10 % More Cooling Capacity with Freezer 7 XThe ARCTIC Freezer 7 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.Longer Lifespan Thanks to its Low Coil TemperatureThe Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 ° C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.Offset Heat Pipes Enable Optimal Heat DissipationThe direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.P-Fan for Increased PerformanceInspired by the P-series, the Freezer 7 X CO's fan benefits from all of the advantages of P-fans:High static pressure for increased cooling performance- Broad rpm range- Lower power consumption- Less vibration- PWM for synchronous fan controlDual Ball Bearing for Continuous OperationThe premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.Direct Touch Heat PipesThe Freezer 7 X CO uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

IBM offers a complete range of rackmount rails for the IBM XSeries server family. The rackmount rails for IBM servers are available in slide rail and fixed rail mounting styles that providing an outstanding solution to protect your IBM XSeries server investment.

Install a 34mm ExpressCard into a 54mm ExpressCard slot, without card slippageThe ECBRACKET2 ExpressCard 34mm to 54mm Stabilizer Adapter helps prevent side-to-side movement of a 34mm ExpressCard, while the card is connected to a 54mm ExpressCard slot.The ExpressCard 34/54 stabilizer can be attached to almost any 34mm ExpressCard to provide added stability and security for your card adapter, including flushmount designed cards.The ExpressCard 34 stabilizer bracket comes in a package of three, so you won't need to swap adapters when using different EC cards.The StarTech.com Advantage- Easily clips onto most 34mm ExpressCards and provides stability inside 54mm ExpressCard slots- Works with flushmount designed ExpressCards as well as traditional ExpressCard designs- Backed by a StarTech.com 2-year warranty and lifetime technical support