Add two Next Generation Form Factor (NGFF) M.2 SATA SSDs to your computer through PCI ExpressThis M.2 SSD controller card lets you install two M.2 SATA solid-state drives (SSD) into your PC through PCI Express. You can mount virtually any M.2 drive directly to the card, giving you a convenient and discreet way to improve your computer system performance. Plus, the card is a vital computer add-on if you need to recover data from an existing M.2 drive, or for expanding your overall internal storage.Leverage the speed and size of M.2 drivesThis M.2 controller card lets you take full advantage of the performance and size benefits of NGFF (Next Generation Form Factor) SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in tighter areas within your computer case. By freeing up space within your computer, you'll also have more room for additional hardware upgrades.When you couple the card with an M.2 drive, you can give your computer's performance a noticeable speed boost, enabling you to replace your platter drive with a faster M.2 SATA III (6Gbps) solid-state drive. By installing an M.2 drive in your desktop computer, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.Rest assured, with simple and cost-effective data recoveryDue to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.Wide compatibilityYou can also rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230.The M.2 controller provides additional installation flexibility with a dual-profile design that fits standard or low-profile cases, so it's the perfect solution for small form-factor or full-sized computers.Get up and running quicklyThis M.2 SSD controller card is easy to install, with native OS support and no additional drivers or software required.The PEX2M2 i s backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage
Add Gigabit Ethernet network connectivity to a Laptop or Desktop through a USB 3.0 portThe USB31000S USB 3.0 to Gigabit Ethernet Adapter adds a single RJ45 Ethernet port to a USB-enabled computer system, with support for Gigabit network connections at full bandwidth, unlike USB 2.0 adapters.This compact USB 3.0 network adapter is backward compatible with older USB 2.0/1.x computer systems (speed limited by USB bus), making it the ideal portable replacement network adapter or laptop accessory. Plus, with support for features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL), the adapter offers a versatile Gigabit network solution for home and business users alike.The USB31000S USB 3.0 Gigabit adapter is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage
Supporting a mix of legacy and new laptops in your organization? This USB-C™ Demultiplexer was engineered to work with Targus USB-C docking stations with Power Delivery (PD). Complete with a USB-C port and two cables — one that transmits power and another that transmits data — it’ll ensure that your non-USB-C legacy laptops are compatible with the Targus USB-C Universal DV4K Docking Station (DOCK180USZ). That way, you’ll have full support through your laptop refresh cycle.
Plugable USB 3.1 Type C (USB C) 10/100/1000 Gigabit Ethernet AdapterThe Plugable USB-C 10/100/1000 Gigabit Ethernet Adapter (USBC-E1000) is an easy way to gain wired gigabit network speeds over USB-C for faster HD video streaming, gaming, web browsing, network access and more. It's also the perfect travel companion for any laptop or tablet due to its small size and USB bus powered design. Some common uses include:- Adding wired gigabit network support to Windows, Ultrabooks, or notebooks without an Ethernet connection- Replacing or upgrading network adapters for your computer- USB network adapters can improve speeds compared to older 10/100 adapters, and most wireless networks- Adding additional network interfaces, and transferring files peer-to-peer over EthernetChipsetInside the USBC-E1000 is an ASIX AX88179 chipset for fast 10/100/1000Mbit network speeds and maximum compatibility with almost all USB-C 3.1, 3.0, and 2.0 hosts.
SATA III (6Gbps) | PCI Express Gen 2 | PCIe x4 Slot | 2x Mini-SAS Connectors | 2x Mini-SAS to 4x-SATA Cables IncludedThis 8-port SATA III (6Gbps) controller enables you to add eight SATA 6Gbps hard drives (HDDs) or solid State Drives (SSDs) to your computer system or server via an available PCIe x4 card slot. The card supports SATA III and PCI-Express Gen 2 Specifications and four SATA controllers to deliver a high-performance data storage solution.Quad Controllers to Deliver 8-Port SATA 6Gbps PerformanceFeaturing four 2-Port SATA 6Gbps controllers and a PCIe-x4 MUX, this SATA card enables the connection of eight high-performance SATA 6Gbps drives with a combined total throughput of up to 16Gbps. The SATA drives are connected via two Mini-SAS ports with two included Mini-SAS to 4x-SATA adapter cables. To ensure a secure connection, each SATA port on the included cables features a locking connector, that will prevent the drive from accidental disconnection when working inside your computer case.Wide CompatibilityThe PCIe MUX that's built into this controller card manages the downstream controllers, which improves motherboard compatibility by ensuring the card will work with motherboards that support bifurcation and motherboards that do not. To further improve motherboard compatibility the card does not have a built-in RAID controller, but fully supports the use of software RAID. Plus, with supports for PCIe Gen 2 and SATA III Specifications this card ensures backward compatibility with previous generations (SATA I/II, PCIe Gen 1) at lower performance.The controller card is widely supported across all popular operating system platforms including Windows (7,8,10, 11), macOS (10.10 - 11) and Linux (2.6.32 and above).Hassle-Free InstallationThe SATA controller card features plug-and-play installation and can be installed in full-profile and low-profile computer systems with a full-profile bracket preinstalled, and an interchangeable low-profile (half-height) bracket included. The card also supports storage software data management systems such as Storage Spaces (Microsoft) , RAID Assistant (MacOS) and mdraid/mdadm (Linux), for hassle-free setup, partitioning and software RAID array building.8P6G-PCIE-SATA-CARD is backed by a StarTech.com 2-year warranty and free lifetime 24/5 North American based, multi-lingual support.The StarTech.com Advantage
Note: Search results and information may differ as they are provided by a third party.
In Stock*: Product stock is updated from the last business day and can change.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
