Showing 280–290 of 7581 results

Save installation time and money with PoE._x000D__x000D_The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (560559) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1000 Mbps._x000D__x000D_Power over Ethernet 802.3at_x000D__x000D_The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter. _x000D_ _x000D__x000D_Eliminate Bottlenecks with Gigabit Speeds_x000D__x000D_Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable GBIC module slots (SFP) provide fibre connectivity for greater distances. _x000D_ _x000D__x000D_Web-Management_x000D__x000D_This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full control over your network. The 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports VLAN, port aggregation, QoS, port mirroring, SNMP V1 and the popular SNMP V2c, just to name a few. _x000D_ _x000D_ _x000D_* Total PoE budget for this switch is 240 watts. Per-port average power distribution is 10 watts; maximum per-port power usage cannot exceed 30 watts.

The Black Box EMD2002SE-DP-R KVM-over-IP delivers cutting-edge connectivity with DisplayPort, USB, and audio integration. Equipped with a high-performance RJ45 interface, it ensures secure and efficient data management. Perfect for remote access and system control, this device is tailored for IT environments requiring flexibility, reliability, and exceptional multimedia compatibility in critical operations.

Gigabit Ethernet to Fiber Mini Media and Rate Converter This standalone mini media and rate converter features 10/100/1000T to 1000SX conversion with a multi-mode ST fiber connector and supports from 220 m to 500 m. It is compatible with the MMCR18 rack-mount chassis. Copper to Fiber Mini Media and Rate Converters Overview The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters. Extend Networks The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 100 meters (328 feet). VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks. Small and Flexible The smaller size and external power supply of the MMC Series allows them to be used almost anywhere. Smart MissingLink (SML) The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Smart Link Restoration Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The MMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.7W of power usage, the MMC Series media converters are some of the most efficient in the market today. Link Test The link test is a fast and easy way for you to test the connections between the media converter ports and the connected end nodes. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and focus your troubleshooting efforts on the right cable or end node.

This 24-Port Cat6 110-Type Patch Panel is made for optimum performance with black electrostatic powder-coated steel and 50 micron gold-plated contacts. Every panel comes in traditional 6-port module format with 110-type terminations, and meets and exceeds EIA/TIA TSB-40 Cat6 connecting hardware specifications. This high density 19-inch 1RU panel design lets you mount in any standard 19-inch rack or cabinet, accommodates top, bottom or side cable entry, and also saves valuable space in your rack. The 24-Port Cat6 110-Type Patch Panel enables effortless installation with easy identification vibrant color labels for 568 A or B specifications. Each terminal offers a wide 110 termination layout and a write-on designation label with a clear holder on the front and numbering on both the front and back to provide a quick, easy way to identify cable runs.

ExtremeSwitching™ Industrial Ethernet Switches Industrial Networking Designed for industrial use, Extreme Industrial Switches provide continuous uptime, manageability and operational efficiency. With full PoE+ power per PoE port, each switch offers the performance needed for todays powerhungry surveillance devices and WLAN access points. Extreme Industrial Switches are an excellent choice for industrial environments, including intelligent transportation systems, utilities, and smart cities. Full redundant ring technology creates fault-tolerant networks with high availability with industry standard technologies.

The Netgear GS116LP-100NAS 16 Port 76W PoE+ Gigabit Ethernet Unmanaged Switch is the perfect solution for expanding your network with the added convenience of Power over Ethernet (PoE+) capabilities. This switch features 16 Gigabit Ethernet ports, with eight of them supporting PoE+, providing a total power budget of 76W. This allows you to power devices such as IP cameras, wireless access points, and VoIP phones directly through Ethernet cables, eliminating the need for separate power supplies and simplifying your network setup. The unmanaged design ensures ease of use with a simple plug-and-play setup, making it ideal for users who prefer straightforward installation without the need for configuration. The GS116LP-100NAS is housed in a durable metal casing that ensures longevity and protection, while its fanless design guarantees quiet operation, making it suitable for noise-sensitive environments. The switch also includes energy-efficient technology that reduces power consumption when network traffic is low, making it a cost-effective choice for growing businesses. Whether you’re enhancing an existing network or deploying a new one, the Netgear GS116LP-100NAS offers reliable performance, robust power delivery, and seamless connectivity in one efficient package.

Rugged PoE Extender | 60 Watts | IP-30 Aluminum Housing | 100m (330ft)Extend the Reach of PoE Links up to 328 FeetExtends the reach of PoE links up to 328' (100 m) to power powered devices (PD) over long distances; up to 4 extenders can be cascaded to extend the range of a PoE source (PSE) device up to an additional 400m, for a total range of 500m from the original PSE source to the target device.Using Cat 5e (or higher rated) Ethernet cabling, it supports IEEE 802.3af (PoE / Type 1), IEEE 802.3at (PoE+ / Type 2), and IEEE 802.3bt (PoE++ / Type 3) to support PD devices like pan and tilt cameras, lighting, sensors, and wi-fi access points.Designed for Harsh EnvironmentsThis PoE extender features IP-30 housing and an MTBF is 500,000+ hrs (Telcordia/Bellcore) at 50C, for long-term reliability and durability. Operating temp of -40C to 75C permits use in a wide range of indoor and outdoor applications that are not temperature controlled.Rated to various vibration, shock, and free-fall standards: Vibration: EN 60068-2-6 Shock: EN 60068-2-27 Free-Fall: EN 60068-2-32PoE Extender also includes hardware for mounting to the DIN rail or wall.Flexible Power OutputsAccepts inputs up to 95W from a PSE source and can provide 15W, 30W, or 60W of power output to a target PD device. Low 2.7W power consumption provides more power for devices, especially when multiple extenders are used for a single extension.Features ESD, EFT, and surge protection at the following standards: ESD: IEC 61000-4-2: Contact: 6KV; Air: 8KV EFT: IEC 61000-4-4: Power: 2KV; Signal: 2KV Surge: IEC 61000-4-5: Power: 2KV; Signal: 2KVPOEEXT1G60W is backed by a StarTech.com two-year warranty and free lifetime technical support.The StarTech.com Advantage- 100M EXTENSION: Extend a PSE source (up to 95W) by 100m using this Gigabit PoE Extender; power PoE devices like cameras & access points; 4 extenders can be cascaded to extend up to 400m using CAT 5e/6- 60W PoE IEEE 802.3bt: Powered by the PSE source, this Power over Ethernet range extender provides up to 15W/30W/60W of auto-negotiated power output to target PD device- Low 2.7W power consumption

The Black Box IC400A-R2 USB 2.0 extender provides four ports for extending USB connections up to 328.08 feet over CATx cables. Perfect for remote workstations, industrial setups, or large installations, this device ensures stable, long-distance USB connectivity without compromising speed or performance. Ideal for multiple USB devices in a single setup.

The Extreme AP305C-FCC is a high-performance wireless access point delivering dual-band connectivity with speeds up to 1.73Gbps. Designed for indoor environments, it supports seamless integration into enterprise networks. With advanced security features and intuitive management tools, this access point ensures robust, reliable, and efficient wireless connectivity for modern business needs.

The Aruba 6100 24G Class4 PoE 4SFP+ 370W Switch is a manageable switch with 24 ports, supporting Power over Ethernet (PoE) and SFP+ connectivity. It provides three layers of network support and is suitable for various network configurations requiring efficient management and high-speed connectivity.