Showing 1110–1120 of 2668 results

This unit supports A4, A5, A6, Executive, Folio, JIS B5, Letter, Legal, Oficio and Statement sizes. Paper (16 to 47 lb., 60 to 176 gsm), transparencies, card stock and labels may be used from this tray. Envelopes in sizes 7¾, 9, 10, B5, C5 and DL may also be used from this tray.The optional caster base may be required when the product is configured with the spacer or additional trays (1 to 4). Go to www.lexmark.com/multifunctionprinters for more information.Paper size, paper and tray-present and tray-low and tray-empty sensing are supported.

When both an Output Expander and High Capacity Output Expander are installed, the Output Expander must be installed above the High Capacity Output Expander.Up to 3 Output Expanders may be supported at a time. Any combination of Output Expander and 4-Bin Mailbox for up to a total of 3 devices may be configured.This unit supports up to 500 sheets of paper (20 lb., 75 gsm). Envelopes, transparencies, card stock and labels are also supported with this unit.The Output Expander supports bin 'full' sensing.

The 4-Bin Mailbox supports bin 'empty' and 'full' sensing.Up to three units may be installed. Any combination of Offset Stacker and 4-Bin Mailbox for up to a total of 3 devices may be configured.This unit supports up to 100 sheets of paper (20 lb., 75 gsm) per bin of A4, A5, A6, JIS B5, Executive,Folio Letter, Legal, Oficio or Statement sizes. Only paper (16 to 24 lb, 60 to 90 gsm) may be used with this unit.

The Spacer cannot be used with the 2100-Sheet Tray.If the product configuration contains the 2,100-Sheet Tray, the optional caster base is required.Paper size, paper and tray-present and tray-low and tray-empty sensing are supported.This unit supports A4, A5 (long edge first), Folio, Letter, Legal and Oficio sizes. Only Paper (16 to 36 lb , 60 to 135 gsm) may be used from this unit. Install below any other trays.

This unit supports up to 500 sheets of paper (20 lb., 75 gsm). Envelopes are also supported with this unit.The Offset Stacker supports bin 'full' sensing.

The MarkNet N8370 adds 802.11 a/b/g/n/ac wireless connectivity to Lexmark devices via network infrastructure or Wi-Fi Direct for mobile users. The Lexmark N8370/N8372 also supports dual-band connectivity for both 2.4 GHz and 5 GHz wireless networks. Installation and control Easy installation: Simply slide the wireless card into the internal solutions port. Other models require a standard card-mounting pod or a wireless module plugged into the Lexmark device’s USB connection. Management security: Built-in SNMPv3 supports encrypted and authenticated management traffic, protecting remote configuration and device status messages. Network layer protection: Standard IPsec support can be used with both IPv4 and IPv6 TCP/IP networks for encryption and authentication of communications at the network layer. Enhanced security Wireless encryption support: Prevent wireless tampering or eavesdropping with WEP Encryption (64- and 128-bit key), Wi-Fi Protected Access (WPA2™) Personal level security and Wi-Fi Protected Access (WPA2™) Enterprise level security. You control who can access the printer via standard Wi-Fi. Continuous, secure control: The embedded web page allows administrators to flash-update device firmware or access its settings using a web browser for easy monitoring of device status and changes to default settings. One print server - two functions Connect network users: The wireless print server function adds 802.11a/b/g/n/ac connectivity to Lexmark devices and can be configured as part of your network infrastructure. Support direct printing: Support for Wi-Fi Direct allows users of smartphones and tablets (Android, iOS) to print wirelessly without spending time or effort configuring network access*.

FINISHER for Machine: LEXMARK CS963E/CS963G/CX833G/CX833SE/CX833XG/CX833XSE/CX961G/CX961SE/CX961TG/CX961TSE/CX962G/CX962SE/CX962TG/CX962TSE/CX963G/CX963SE/CX963XG/CX963XSE/XC8355/XC9635/XC9645/XC9655