Showing 120–130 of 205 results

- 18 m x 25 m (60 ft x 80 ft) standard coverage, 8 m x 10 m (25 ft x 33 ft) selectable short range coverage- EN50131-2-4 Grade 3 compliant- Sensor data fusion technology- Tri-focus optics technology- Range adaptive radarThe ISC-PDL1-WA18x Professional Series TriTech+ Detectors with Anti-mask are exceptionally suited for commercial indoor applications. MANTIS anti-mask technology makes obscuring the detector view nearly impossible for intruders. Sensor data fusion technology ensures that the detector sends alarm conditions based on precise information. Tri‑focus optics eliminate coverage gaps and respond efficiently to intruders. The powerful combination of unique features in the Professional Series delivers superior catch performance and virtually eliminates false alarms.The self-locking two-piece enclosure, built-in bubble level, flexible mounting height, and three optional mounting brackets simplify installation and reduce service time.

Mounts a seismic detector within the floor. Weighs 2.08 kg (4.5 lb). Requires a base area of at least 30 cm x 30 cm (12 in. x 12 in.) and a depth of 80 cm (31 in.).

- 24-hour surveillance of vault walls and doors, safes, night safes, and automatic teller machines- Sensitivity settings using DIP switches- SENSTEC sensor and signal processing system based on microcontrollers- Low-profile design

Seismic detector with 4m operating radius on concrete and 50m monitoring areaWhen cutting and drilling through materials such as concrete, steel, or synthetic reinforcements, deviations from the structures' normal vibration pattern ensue. The SENSTEC sensor converts vibration deviations into electrical signals. The digital processing in the seismic detector analyzes the signals and compares them to a frequency range typical of tools used to break into safes, night safes etc. If the signals fall within this frequency range, the seismic detector transmits an alarm via a relay contact.

- 24-hour surveillance of vault walls and doors, safes, night safes, and automatic teller machines- Sensitivity settings using DIP switches- SENSTEC sensor and signal processing system based on microcontrollers- Low-profile designSeismic detector with 5m operating radius on concrete and 80m monitoring area.When cutting and drilling through materials such as concrete, steel, or synthetic reinforcements, deviations from the structures' normal vibration pattern ensue. The SENSTEC sensor converts vibration deviations into electrical signals. The digital processing in the seismic detector analyzes the signals and compares them to a frequency range typical of tools used to break into safes, night safes etc. If the signals fall within this frequency range, the seismic detector transmits an alarm via a relay contact.

Bosch B10R. Width: 12.5" (318 mm), Depth: 2.99" (76 mm), Height: 14" (356 mm)

The PVA-4R24 24 Zone Router is a zone extension for the PAVIRO system. The PVA-4R24 adds 24 zones 20 GPIs 24 GPOs and 2 control relays to the system and is controlled and supervised via the CAN bus by the PVA-4CR12 (Controller). Up to 20 external routers can be connected to one controller. One router can handle up to 4000 W speaker load. The maximum load of one zone is 500W.The zone indicator lights on the front indicate the current status of every zone:• Green: Zone in use for non emergency purpose• Red: Zone in use for emergency purpose• Yellow: Zone fault detected• Off: Zone in idle condition

The PVA-4CR12 controller is the central paging manager for the PAVIRO system. Eight local audio inputs can be switched to four audio outputs. A two channel message manager is integrated. The controller provides all the audio processing supervision and control functions for a complete PAVIRO system. A single controller supports up to 16 call stations and 492 paging zones. The controller is equipped with 12 zones 18 GPIs and 19 GPOs. One controller can handle up to 2000 W loudspeaker load. Additional zones and power can be added by using up to 20 external routers and 40 amplifiers with each 2 ✕ 500 W. The zone indicator lights on the front indicate the current status of every zone:

More than power distribution, the Premium+ PDU is the most advanced - yet simplest - to use IP control solution for Remote System Management in the industry. Developed around a platform that has been proven on the most secure networks in the world, this next-generation power distribution unit provides unmatched monitoring, control, logging, security and power protection capabilities available for demanding AV applications. The RackLink™; technology allows you to control locally or virtually through 3rd party AV control systems, cloud platforms and SNMP for flexible management that is smarter, faster and reduces service costs.