Showing 20–30 of 70 results

250W DC system power supply (reverse airflow)

1200W PWR SUPPLY,US,LFAT-PWR1200-10

Gigabit Small Form-Factor Pluggable ModulesThe Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber and copper interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.CompatibilityAllied Telesis SP Series Gigabit Small Form-Factor Pluggables (SFPs) are supported on all Allied Telesis devices with SFP uplink connections.SP Series SFPs are Multi-Sourcing Agreement (MSA)-compliant, and fully adhere to industry standard networking regulations. This allows the SP Series to be used with other MSA-compliant platforms that support SFP uplink connections.For Cisco compatibility please refer to the “SFP Compatibility Flyer”.OptionsSP Series SFPs offer short-haul,long-haul and Bi-Directional (BiDi) solutions. This flexibility allows network managers to easily extend network distance and bandwidth.Using an SFP BiDi transceiver can upgrade transmission capacity on a typical network—without installing new fibers—by utilizing a single fiber for both the send and receive signals.Multiple temperature rangesDifferent network environments call for a variety of temperature ranges. The SP Series is available in standard (0-70°C), industrial (-40 to 85°C), and extended (-40 to 105°C) temperature variants.

The Allied Telesis MCF3300 is a 1RU three-blade chassis able to support up to 24 media conversions, dependent on connector type. The MCF3300 is powered by hot-swappable AC or DC power supplies, which allows for flexibility amongst connection types and speeds. At 1RU high, it is the industry's smallest form factor model for up to 24 media conversions.

The SP10 series offers the latest industry standard in flexible, full-duplex Gigagbit Ethernet connectivity. These hot-swappable fiber interfaces simply plug into a SFP slot on our SFP compatiable products. You can optimize the configuration to meet your distance and service requirements.

OverviewThe AT-WLMT is a simple metal bracket thatallows the majority of Allied Telesis’ range ofstandalone media and converters and rate(bridging) converters to be wall-mounted.Mounting Option RequirementsThe majority of media converters are used toconvert fiber optic connections to copper. Manyinstallations require these media converters tobe installed in a 19-inch chassis, using a range ofmounting options including AT-TRAY1,AT-TRAY2and the AT-MCR12. However, other applicationssuch as Fiber-To-The-Home (FTTH), etc, requirea small un-obtrusive mounting option that canbe discretely placed on a wall or under a tabletop.The AT-WLMT was designed to meet thisdemand.Simple InstallationEach AT-WLMT has two circular holes and two‘key’ slots on the base.The use of the circularholes allows two countersunk screws to mountthe bracket on a horizontal surface underneatha table top, whilst the two key slots allow thebracket to be easily wall-mounted.SecurityAny media converter or rate (bridging) convertermounted in an AT-WLMT chassis is held securelyin place by means of a locking screw.This ensuresthat the media converter is not easily removed,thus helping to prevent accidental breakage ofthe fiber optic cable connected to the device, andalso theft of the actual unit.

The AT-SPLX40 offers a long-haul option to extend your network up to 40 km.

The Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.

The XEM2-4QS provides 4 x 40G QSFP+ ports per module, enabling up to 32 40G ports per chassis. These ports can also be configured as stacking links for a high-capacity backbone ideal for distributed resilient networks.Delivers a scalable network with superior flexibility, to meet network demands both now and well into the futureEliminate bottlenecks with a high-capacity 2.6 Terabit fabric, or up to 10 Terabits when stacked (stacking available in a future release)Hot-swappable expansion modules (XEMs) support a variety of fiber and copperEnjoy powerful network management with Allied Telesis Autonomous Management Framework (AMF) to simplify and automate your everyday tasks

10 Gigabit Small Form-Factor Pluggable ModulesThe Allied Telesis SP10 Series offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise and service provider transport applications. These industry-standard hot-swappable devices simply plug into the Ethernet SFP+ port on all SFP+-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.CompatibilityAllied Telesis SP10 Series 10 Gigabit SFP+ modules are supported on all Allied Telesis devices with SFP+ uplink connections.OptionsThe SP10 Series offers short-haul and long-haul solutions. From the inexpensive Allied Telesis SP10SR to the far-reaching Allied Telesis SP10ZR80/I, the network can be extended to meet any performance needs.InteroperabilityThe SP10 Series SFP+ modules fully comply with industry-standard networking regulations. This allows the SP10 Series to be used with any networking equipment which complies with industry standards.BiDi transceiversUsing an SFP BiDi transceiver can upgrade transmission capacity on a typical network—without installing new fibers—by utilizing a single fiber for both the send and receive signals.ApplicationsThe Allied Telesis 10G Long Reach Multimode (LRM) optic is designed to transmit and receive optical data over a legacy OM1 multi-mode fiber link up to 220m. This makes it ideal for high-speed storage area networks, computer cluster cross-connect and custom high-speed data pipes.The extended temperature optics offer a wide operating temperature range of -40C to 85C, allowing deployment in even the harshest industrial environments.