Showing 0–10 of 50 results

The APC SurgeArrest Essential series represents the primary level of surge protection that should be present on any of your computers and household electronics. Its state-of-the-art circuitry offers protection for sensitive electronic equipment against larger power surges and more common power fluctuations. Six surge protected outlets, status indicator LED lights, and lifetime Equipment Protection Policy make the APC PE66W SurgeArrest the best value for quality surge protection.Reliable Power ProtectionAs one of the world’s largest and most respected power protection designers and manufacturers, APC is relied upon daily for power protection and availability. APC products offer the maximum level of protection, safety, convenience, and reliability.APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V for North American products, and a rating of less than 15 percent for products sold worldwide.Convenient and Safe for Home or OfficeThe SurgeArrest’s Surge Protection Working LED will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100 percent protection. If the Protection Working LED is not illuminated simply contact APC and we will replace your SurgeArrest free of charge.Ensures Maximum ProtectionMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC SurgeArrest’s Fail Safe Mode disconnects equipment from the power supply if the circuit of an APC SurgeArrest has been compromised, ensuring that no damaging surges reach your equipment.Safety-Agency Approved Protector with Lifetime WarrantyThe PE66W has been tested and approved to work safely by a third-party Nationally Recognized Testing Laboratory (NRTL). The Protection Working LED illuminates when the SurgeArrest is switched on and supplying protection to your connected equipment. If your SurgeArrest PE66W has been damaged by a heavy lightning strike or power line surge, APC will replace it free of charge.

SurgeArrest Panelmount 208/120V 160KA w/ Disconnect & Surge CounterHigh quality TVSS for datacenters, industrial facilities and commercial buildings.Alarm contactsEnables remote monitoring of TVSS alarm status.Replaceable individual phase modulesSignificantly reduces the time to repair a damaged surge protector, minimizing the time that critical loads are unprotected from transients.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Lightning and Surge ProtectionTo prevent damage to your equipment from power surges and spikes.Noise Filtering120kA SurgeArrest models contain EMI/RFI filtering to reduce line noise that can cause data loss and keyboard errors. 40kA and 80kA units do not contain noise filtering components, so they can be used with powerline networking systems (X10, HomePlug, PLC, etc.).Maximum surge current ratings40kA, 80kA and 120kA per phase maximum surge current ratings, for all your residential, commercial and individual equipment protection needs.Catastrophic Event ProtectionSurgeArrest Panelmount SPDs are equipped with fuses and thermal disconnects that react quickly to protect against dangerous high and low current wiring faults as well as other catastrophic surge events. These panelmount SPDs are passive, and continue to allow power through to your home or building if any of the surge components are damaged.Status Indicator LED'sLED status indicators for each phase and an audible alarm provide immediate failure notification when suppression circuitry has been damaged by a heavy strike or surge.Physical SizeFor easy installation inside your circuit breaker panel (40kA model) or next to your power distribution panels. (80kA and 120 kA models)Chase nipple connectionAllows for mounting of the PM2X units rigidly to the side of your panelboard.

ProtectionLightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.IEEE let-through ratings and regulatory agency complianceAPC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.SafetyProtection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Catastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.Marketing FeaturesData-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Protection from electrical noise interference and damaging power transients. Adjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment. Adjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment.Sequenced turn on/offHelps power on components in the proper order to prevent speaker stress. Proper sequencing can also help manage current draw on startup to prevent unnecessary circuit breaker tripping.LED status indicatorsQuickly understand unit and power status with visual indicators.Isolated filter banksEliminates electromagnetic and radio frequency interference (EMI/RFI) as a source of audio-video signal degradation.

Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.Noise FilteringSurge Protector attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.IEEE let-through rating and UL 1449 complianceThe 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".

Modular data-line surge suppression for network, telecommunication and PC system protection.Features:-Data-line Protection. -Replaceable surge protection modules. -Surge Protection.

APC NET7 SurgeArrest Network. Surge energy rating: 480 J, AC outlets quantity: 7 AC outlet(s), Nominal input voltage: 120 V. Product color: Beige, EMI/RFI noise filtering: 70 dB. Weight: 32.1 oz (910 g). Certification: CSA/UL 1283/UL 1363/UL 1449. Package width: 7.24" (184 mm), Package height: 2.09" (53 mm)

3 Modes of protection (L-N : L-G : N-G)The remaining modes continue to provide protection in the event a mode of protection is compromised as a result of a surge.EMI and RFI noise filteringReduces line noise that can cause data loss and keyboard errors.Power Line Communications (PLC) compatibleProtects PLC network adapters without interrupting network communications.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Overload IndicatorIndicator illuminates when connected equipment draws more power than unit’s capacity. To remedy the condition, unplug less vital equipment.180 degree Rotating Cord RetainerA 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.Dataline Surge ProtectionProvides protection of connected equipment from power surges on the data lines.Cord managementReduces cord clutter.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Lightning and Surge ProtectionTo prevent damage to your equipment from power surges and spikes.

APC Workshop SurgeArrest 7 OutletsBasic Protection for Computers and ElectronicsStatus Indicator LED'sProvides a quick visual indication of your unit's status.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.IEEE let-through rating and UL 1449 complianceThe 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".Lightning and Surge ProtectionTo prevent damage to your equipment from power surges and spikes.SurgeArrest Essential Features & BenefitsProtectionLightning and Surge ProtectionTo prevent damage to your equipment from power surges and spikes.IEEE let-through ratings and regulatory agency complianceStringent third-party testing gives you confidence that APC's surge protectors will safeguard your equipment and data from potentially damaging surges and spikes.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.SafetyCatastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.

SurgeArrest Panelmount 240/120V 120KA w/ Surge CounterAudible failure alarmCalls attention to a damaged surge supressor, identifying the need for service. Reduces the time protected equipment is at risk due to compromised surge suppression.Themal overload protectionPrevents thermal run-away when metal oxide varistors (MOVs) become damaged, or when a continuous overvoltage condition exists.Surge counterRecords the number of power surges the unit is exposed to which can be used as an indicator that the unit is providing protection as intended. A high number of surges can be an indicator of poor facility power quality and the need for additional corrective actionsNEMA 3R/12 enclosureMeets the requirements of a NEMA 3R enclosure for outdoor applications, and a NEMA 12 enclosure for indoor applications.Alarm contactsEnables remote monitoring of TVSS alarm status.Replaceable individual phase modulesSignificantly reduces the time to repair a damaged surge protector, minimizing the time that critical loads are unprotected from transients.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Lightning and Surge ProtectionTo prevent damage to your equipment from power surges and spikes.Noise Filtering120kA SurgeArrest models contain EMI/RFI filtering to reduce line noise that can cause data loss and keyboard errors. 40kA and 80kA units do not contain noise filtering components, so they can be used with powerline networking systems (X10, HomePlug, PLC, etc.).Maximum surge current ratings40kA, 80kA and 120kA per phase maximum surge current ratings, for all your residential, commercial and individual equipment protection needs.Catastrophic Event ProtectionSurgeArrest Panelmount SPDs are equipped with fuses and thermal disconnects that react quickly to protect against dangerous high and low current wiring faults as well as other catastrophic surge events. These panelmount SPDs are passive, and continue to allow power through to your home or building if any of the surge components are damaged.Status Indicator LED'sLED status indicators for each phase and an audible alarm provide immediate failure notification when suppression circuitry has been damaged by a heavy strike or surge.Physical SizeFor easy installation inside your circuit breaker panel (40kA model) or next to your power distribution panels. (80kA and 120 kA models)Chase nipple connectionAllows for mounting of the PM2X units rigidly to the side of your panelboard.