Showing 90–100 of 638 results

Get the performance you demand at a price that makes sense with Plenum-Rated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.- A cost effective solution that provides higher bandwidth and support for longer distances- Perfect for use in Gigabit Ethernet applications- Headroom for tomorrow’s higher bandwidth needs- CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanship- Connectors: (2) LC to (2) LC- Buffer OD: 900 µm- Jacket OD: 3.0 mm- Jacket color: Blue- Attenuation @1310 nm: 1.0 dB/km- Attenuation @1550 nm: 0.75 dB/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

We offer high-quality plenum-rated LC to LC fiber optic patch jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.- Connector: LC Male to LC Male- Fiber Size: 62.5/125 micron- Type: Multimode; Duplex- Features: - Color-coded connector keys available in red, blue, green and black - CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit - RJ style latch in a connector body half the size of a conventional SC - Small, rugged design - LC connector is easy to engage and disengage featuring a "telephone jack style" release mechanism - Latch design prevents the plug from snagging when jumper cables are being routed - Immune to electrical interference- Application: - Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet - Subsystem: Telecommunications Closet, Equipment Room, Work Area- Includes LC clips

Get the performance you demand at a price that makes sense with 9/125 single-mode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.Features:A cost effective solution that provides higher bandwidth and support for longer distancesPerfect for use in Gigabit Ethernet applicationsHeadroom for tomorrow’s higher bandwidth needsLifetime warranty against defects of materials and workmanshipConnectors: (2) LC to (2) SCBuffer material: PVCBuffer OD: 900 µmJacket material: PVC (OFNR-rated)Jacket OD: 3.0 mmJacket color: YellowAttenuation @1310 nm: 1.0 dB/kmAttenuation @1550 nm: 0.75 dB/kmMaximum tensile load: 100 N/cmLoaded min. bend radius: 5 cmUnloaded min. bend radius: 3 cmCrush resistance: 750 N/cmImpact resistance: 1000 cyclesFlex resistance: 5000 cycles

We offer high-quality LC to LC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.

Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.Features: - Fully compatible with multimode fiber applications - A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances - Perfect for use in Gigabit Ethernet applicationsSpecifications: - Connectors: (2) LC to (2) SC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Orange - Attenuation @850 nm: 3.75 dB/km - Attenuation @1310 nm: 1.5 dB/km - Min. bandwidth @850 nm: 160 kHz/km - Min. bandwidth @1310 nm: 500 kHz/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications.Features: - Fully compatible with 50/125 multimode fiber applications - Use with both LED and VCSEL laser light sources - Designed for use in 10-Gigabit ethernet applicationsSpecifications: - Connectors: (2) LC to (2) LC - Type: Laser-Optimized 50/125 Multimode Duplex - Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm - 10 Gigabit transfers up to 300m using 850nm VCSEL source - Jacket material: PVC (OFNR-rated) - Jacket color: Aqua

Color-code with this 9/125 micron cable for gigabit ethernet applicationsCost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to ST termination, this high-quality fiber optic patch cable is specificially designed for gigabit ethernet applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125 multimode fiber, immune to electrical interference.

We offer high-quality LC to SC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.

Get blazing-fast 10-Gigabit performance with plenum-rated laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.- Fully compatible with 50/125 multimode fiber applications- Use with both LED and VCSEL laser light sources- Designed for use in 10-Gigabit ethernet applications- CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit

We offer a high-quality fiber optic patch cable designed with ST to ST termination, and is perfect for ethernet, multimedia, or communication applications. The ST connector features a bayonet locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. The pull-proof jacket design surrounds the popular 62.5/125 multimode fiber.