Showing 10–20 of 638 results

For your high speed single-mode fiber applicationsGet the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

We offer high-quality LC to SC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. Features:- A cost effective solution that provides higher bandwidth and support for longer distances- Perfect for use in Gigabit Ethernet applications- Headroom for tomorrow’s higher bandwidth needs- Lifetime warranty against defects of materials and workmanship- Connectors: LC to SC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Yellow- Attenuation @1310 nm: 1.0 dB/km- Attenuation @1550 nm: 0.75 dB/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications.- Fully compatible with 50/125 multimode fiber applications- Use with both LED and VCSEL laser light sources- Designed for use in 10-Gigabit ethernet applications- Lifetime warranty against defects of materials and workmanship- Connectors: (2) LC to (2) LC- Type: Laser-Optimized 50/125 Multimode Duplex- Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm- 10 Gigabit transfers up to 300m using 850nm VCSEL source- Jacket material: PVC (OFNR-rated)- Jacket color: Aqua

Get the performance you demand at a price that makes sense with 9/125 single-mode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.Features:A cost effective solution that provides higher bandwidth and support for longer distancesPerfect for use in Gigabit Ethernet applicationsHeadroom for tomorrow’s higher bandwidth needsLifetime warranty against defects of materials and workmanshipConnectors: (2) LC to (2) LCBuffer material: PVCBuffer OD: 900 µmJacket material: PVC (OFNR-rated)Jacket OD: 3.0 mmJacket color: YellowAttenuation @1310 nm: 1.0 dB/kmAttenuation @1550 nm: 0.75 dB/kmMaximum tensile load: 100 N/cmLoaded min. bend radius: 5 cmUnloaded min. bend radius: 3 cmCrush resistance: 750 N/cmImpact resistance: 1000 cyclesFlex resistance: 5000 cycles

For your high speed single-mode fiber applicationsGet the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.

We offer high-quality LC to ST Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.

Get blazing-fast 10 gigabit performance with laser-optimized multimode fiber (LOMMF) cables. Besides fully providing backward compatibility with existing 50/125 equipment, they also provide the performance headroom required to support LED and VCSEL laser light sources, and 10 gigabit ethernet applications.

Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than 62.5/125 fiber. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 50/125 multimode fiber, immune to electrical interference.

Our MTP fiber assembly consists of twelve laser-optimized, 10gb 50/125µm multimode fibers under one OFNP plenum-rated jacket. Save time and money with MTP’s increased ease of installation - simply pull one cable rather than twelve. With our MTP, it's possible to run a single cable that automatically terminates twelve fibers in one easy plug-in. The small form factor of an MTP connector provides a higher port density. Make MTP your choice for high-density fiber networks!- Easier installation- Small, rugged design- MTP connector is easy to engage and disengage with its "push-pull" release mechanism- Latch design prevents the plug from snagging when jumper cables are being routed- Immune to electrical interference- Application: Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet