Showing 10–20 of 48 results

- Save time and money by delivering data and power via existing network cables- Power output of up to 60 watts over a four-pair Cat5 or Cat6 network cable- Compatible with IEEE 802.3bt (Ultra-PoE) IEEE 802.3at and IEEE 802.3af- Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges VoIP [Voice over Internet Protocol] telephones IP surveillance cameras)- Distance support: up to 100 m (328 ft.)- Internal power supply- Fanless design ideal for silent operation- Three-Year Warranty

- 4K @ 60Hz- 18 Gbps Bandwith- HDMI male to male- Shielded 5m/15 ft - Black

- Impedance Matched- Gold Plated Contacts- Unique PVC Jacket- Snag Free Boots- Strain Relief- Standards Tested- Meet or exceed current Cat5e proposed standards- Lifetime Warranty- UTP- Certified to 350 MHz- EIA/TIA Approved- 4 Pairs- RJ-45 Connectors

- Impedance Matched- Gold Plated Contacts- Unique PVC Jacket- Snag Free Boots- Strain Relief- Standards Tested- Meet or exceed current Cat5e proposed standards- UTP- Certified to 350 MHz- EIA/TIA Approved- 4 Pairs- RJ45 Connectors

- Saves time and money by delivering data and power via existing network cables- IEEE 802.3at compliant (PoE+)- Power output up to 30 watts- Distance support: up to 100 m (328 ft.)- Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges VoIP [Voice over Internet Protocol] telephones IP surveillance cameras and more)- Supports IEEE 802.3at/af detection and short circuit overload and high-voltage protection- Internal power supply- Fanless design ideal for silent operation- CE-approved

- 10/100/1000 auto-sensing ports automatically detect optimal network speeds- Auto-MDIX (auto uplink) support for all RJ45 ports- For use on desktop or mounted in standard 19" rack- Supports NWay auto-negotiation- Store and forward switching architecture- Full/half duplex operation- Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode- Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length- Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification- 48 Gbps switch fabric- Supports jumbo frames up to 9 kBytes- Supports 16k MAC address entries- 512 kBytes buffer memory- Supports MAC address auto-learning and auto-aging- Fanless design ideal for silent operation- Includes 19" rackmount brackets

Provides power and data connection for up to 16 PoE network devicesSave installation cost by delivering data and power over existing network cables10/100/1000 auto-sensing ports automatically detect optimal network speedsTwo small form-factor pluggable GBIC module slots (SFP)IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output portsPower output up to 30 watts per port*PoE power budget of 374 watts36 Gbps switch fabricSupports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points VoIP phones IP cameras etc.)Supports IEEE 802.3at/af detection and short circuit overload and high-voltage protectionAll RJ45 ports with Auto-MDIX and NWay auto-negotiation supportComplies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specificationPoE management functions include PoE port settings priority power-on delay scheduled PoE device restart and PoE device monitoringSNMP Management and Remote Monitoring (RMON)SNMP V1 V2C V3 with RMON groups 1 2 3 & 9IPv4/v6 dual protocolSupports VLAN (tag-based and port-based)Provides IEEE 802.1x port-based securitySupports link aggregation (trunking)Supports bandwidth control per portSupports port mirroringSupports two types of QoS: port-based and DSCPBroadcast storm control with multicast packet rate settings512 kBytes buffer memorySupports 8k MAC address entriesSupports jumbo frames up to 9 kBytesSupports Rapid Spanning Tree/Spanning Tree protocolStore and forward switching architectureFull/half duplex operationIEEE 802.3x flow control for full duplexConfiguration via Web browser Telnet or SSHLEDs for power link/activity and PoETwo high-volume cooling fans ensure perfect ventilationThree-Year Warranty

Extends an existing PoE connection beyond the 100m (328-ft.) limitSaves time and money by delivering data and power via existing network cablesCovers longer distances by cascading multiple PoE extenders (Model 560962) togetherDaisy-chain up to five PoE extenders for a distance of up to 600 m (1968 ft.)Supports 10/100/1000 Mbps data rates and delivers up to 25 W to a connected PoE devicePoE awareness ensures that power is only sent to IEEE 802.3af/at-compliant devices non-PoE devices only receive dataRequires no additional power supply; draws the power directly from the PoE inputCompatible to IEEE 802.3at/af-compliant PoE injectors and PoE switches (PSE)Compatible to IEEE 802.3at/af-compliant powered devices (PD)LEDs for PoE and dataFanless design ideal for silent operationCompact metal caseMounting holes for wall mountingATTENTION: Not compatible to 16-Port Fast Ethernet PoE+ Switch model 560849Three-Year Warranty

- Ideal for 19" rackmount applications- Maximum static load of 30 kg- Usable depth: 385 mm (15.16 in.)- Cable entry via rear or top panel- 4MM toughened glass door- Rear door for easy access to back of cabinet- Reversible Front door- Cold-rolled galvanized SPCC steel with up to 1.5 mm thickness- Ships Flatpacked

- Provides up to four PoE network devices with power and data- PoE power budget of 40 watts- 10 Gbps switch fabric / switching capacity- 10/100/1000 auto-sensing ports automatically detect optimal network speeds- Compatible with IEEE 802.3at/af-compliant powered devices (PD) such as network cameras wireless access points VoIP phones and more- Power output up to 30 watts per port- Short-circuit overload and high-voltage protection- Saves time and money by delivering data and power via existing network cables- Auto-sensing PoE awareness to ensure that power is only sent to IEEE 802.3at/af-compliant devices; non-PoE devices only receive data- Supports 2k MAC address entries with Auto-Learning and Auto-Aging- Supports jumbo frames up to 9 kBytes- Buffer memory of 125 kBytes- ESD protection up to 8 kV (air) and 6 kV (contact)- Mounting holes for wall mounting- Store and forward switching architecture- Supports IEEE 802.3x flow control on full duplex and backpressure on half duplex- Fanless design ideal for silent operation- Fully NDAA-compliant