Showing 300–310 of 643 results

The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".

The RAM-202PSAU, double sided adhesive disk, is designed to connect to any 2.5" round base including the RAM-B-202U, RAM-202U or RAP-B-202U.

Until now, locking features on universal laptop holders have been hard to use or simply get in the way of typing. RAM has made all that just a memory with the new RAM SAFE-N-SECURE locking feature. Purchase your laptop mounting system with this option, add it on later, or integrate it into your existing system. No matter what you choose, you'll have one of the best theft deterrents available to keep your laptop where it belongs, with you. Using keyed locking knobs, this system operates easily and does not detract from the overall versatility you've come to love in your RAM Laptop Mount. The four locking knobs allow you to disengage the screwing of the swing arm knobs found on the top of the tele-pole, swing arm joint and laptop tray connection.

The RAM-B-139U-A consists of a SHORT double socket arm, one 2.5" round plate and one 2" X 1.7" plate that contains the universal AMPS hole pattern. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The AMPS hole pattern on each plate will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device.

The RAP-395T-BBU consists of a 1" ball, connected to a round base, that contains female grooves and hardware that will allow mounting to all RAM STACK-N-STOW Bait Boards.

The RAM-101-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5, Mark-5 and Hook-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.

The RAP-396F-2U are replacement fins for the RAP-396U . The replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required.

The RAM-B-273-M6U includes a Hex M6 x 1 female threaded hole connected to a 1" rubber ball

The RAM-220U is a half rail clamp base with 1.5" rubber ball that will connect to rails from 1" to 1.25" in diameter.