Showing 0–10 of 425 results

The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 9.5" to 11.75" maximum Width: 6.375" to 8.25" Depth: 0.13" to 1.1" Note: Product consists of holder only. Case not included.

The RAM® EZ-Roll'r™ Powered Cradle for Sonim XP10 secures your device in a form-fit holder while keeping the entire screen and buttons visible and accessible. This powered cradle features two integrated pogo pins that provide charging capabilities to the device through a male USB Type A connector. Single-handed operation makes it easy to dock and remove the Sonim XP10—simply lift the top lever and pull out the device or place the bottom portion of the device in first and push in to lock in place. Compatible with RAM® two-hole AMPS pattern bases and the RAM® Microphone & PTT Speaker Bracket, this RAM® form-fit cradle easily connects to B and C size ball mounts for use in a wide variety of applications.

The RAM-HOL-TAB19U consists of a spring loaded back plate and custom support cups for the Panasonic Toughpad FZ-G1. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB19U is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Note: If your tablet has an extended battery or handstrap integrated in the back, a set of risers ( RAM-HOL-TAB-RISER1U or RAM-HOL-TAB-RISER2U ) may be required to offset the cups to accomodate the added thickness. Cradle Dimensions: Height: 10.75" to 13.375" Width: 6.5" to 7.75" Depth: 0.13" to 0.93"

The RAM No-Drill laptop mount for the Ford F-Series features a heavy-duty steel mounting base designed to fit the specified vehicles perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. The RAM rubber ball and socket system provides additional adjustability as well as shock and vibration dampening, and the RAM Tough-Tray is spring-loaded to accommodate 10" to 17" laptops. This laptop holder features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally allowing for a custom fit to support various sizes of laptops without blocking ports and drives.

Looking to mount to a metal surface? The RAM® Tough-Mag™ 66mm diameter base is the powerful and durable solution you’ve been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you’re attaching the RAM® Tough-Mag™ to.

Well thought out and compact designs are common place at RAM and our new RAM Tough-Tray II is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPC's, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM.

The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.