Showing 50–60 of 375 results

Analog Emergency Line Sharing Device for IP PBXs/VoIP Phone Systems Shares FXO port with another analog device and seizes the line in the event of a 911 call Maintains the availability of the line in the event the emergency call is disconnected so 911 personnel can call back to reestablish the connection Routes both incoming and outgoing calls Gives priority to emergency devices Incoming calls routed to one of two ports by distinctive ring or quick callback Status LED displays mode of operation Provides a busy signal to the phone port when an emergency device is in use

- Viking Power Supply- 120V AC/12V DC- 2.1mm plug

- Viking Electronics entry phone- Compact size: Front panel is the size of a typical double gang mid- size wall plat- Flush mounts in a double gang electrical box (2.25� deep x 3.7� wide x 2.84� tall minimum)- PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes- Weather Resistant Features: Mylar speaker faceplate gasket mic and speaker gasket internally sealed (IP67) push button switch self draining mic mount and UV stable weather resistant powder coating - Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate stainless steel push button stainless steel speaker screen scratch resistant powder coating hex drive mounting screws- Blue LED helps locate the push button indicate ringing and off-hook- Telephone line powered- Microphone and speaker volume controls- Programmable Intelligent call progress detection for automatic hang-up on CPC silence busy signal or time out- Selectable auto answer feature for monitoring- Programmable VOX (mic/speaker) switching speed- BronzeVKE60BN

- Compact: Front panel is the size of a typical double gang mid-size wall plate- Mounting: Flush mounts in a double gang electrical box (2.25� deepx 3.65� wide x 2.84� tall minimum) or surface mounts in a Viking VE-5x5 (not included see DOD# 424) for mounting to a wall post or VE-GNP Gooseneck Pedestal (EWP recommended)- Available in 4 standard faceplate finishes: Brushed Stainless Steel Oil Rubbed Bronze Textured Black and Satin White- PNL-60 faceplates: Replacement faceplates with matching screws available in all four standard finishes- Self diagnostic reports via email (testing com mic speaker & switch)- Automatic polling and programming software included- 2 Amp relay contacts for door/gate or SL-2 strobe light control- Blue LED indicator- SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)- Outbound Proxy Authentication ID Peer to Peer VLAN Tagging- PoE powered (class 1

- Thin 0.032� thick flexible �ISO� style card- Industry standard 125KHz RFID technology- 26 bit Wiegand format- Non-contact reading for long life- Use with the Viking PRX-1 2 3 5 and certain legacy 125KHz HID� proximity card readers- Up to 253 facility codes and 65 534 card numbers available- Cannot be erased by a magnet

- Viking Door Entry Control for 4 Entry Phones Provides CO Sharing Call Waiting and One Aux Contact- Allows an entry phone to share a single telephone line with a residential or business telephone system- House phones ring with C.O. line cadence or distinctive ring when the entry phone �Call� button is pressed- Compatible with these Viking entry phones: - E-10 E-20A E-30 E-40 Handsfree Phones - K-1500-7 Stainless Steel Panel Phone - Or use with any analog touch tone phone- Provide entry phone activated chimes and whole house paging when used with Viking model SLP-1- Produces double �Call Waiting� tones- One set of normally open and normally closed contacts available for operating a doorbell camera lights etc.- Add door strike capability with the Viking model RC-2A Remote Touch Tone Controller

Built-in high resolution color video camera with wide viewing tilt/swivel adjustments and wide operating temperature of -30� F to 150� F Audio and video transmission on one CAT5E cable (see page 5)Compact size: Front panel is the size of a typical single gang midsize wall plateMounting: Flush mount in a single gang electrical box (2.25� deep x 2.00� wide x 2.84� tall min) electrical box or surface mount in a Viking model VE-3x5 (not included - see Fax Back Document 424)Available in 5 standard faceplate finishes: Brushed Stainless Steel Oil Rubbed Bronze Polished Brass Satin White and Satin BlackPNL-50 faceplates: Replacement faceplates with matching screws available in all five standard finishesWeather Resistant Features: Mylar speaker faceplate gasket mic and speaker gasket internally sealed (IP67) push button switch sealed camera lens potted camera circuit board stainless steel phone and camera mounting hardware and UV stable weather resistant powder coating (excluding E-50-SS )Optional EnhancedWeather Protection (EWP) availableVandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate stainless steel push button stainless steel speaker screen scratch resistant powder coating impact and scratch resistant camera lens and hex drive mounting screwsMicrophone and speaker volume controlsProgrammable Intelligent call progress detection for automatic hang-up on CPC silence busy signal or time outSelectable auto answer feature for monitoringProgrammable VOX (mic/speaker) switching speedBlue LED helps located push button indicate ringing and off-hook

- The SV-5W is a single speaker volume control designed to be mounted into a single gang rough-in box. The SV-5W is ideal for controlling the volume of ceiling mounted speakers in conference rooms and private offices where the occupants may choose to hear pages lower the ambient noise level or turn the speaker off completely.- The SV-5W comes complete with wire nuts for easy installation.- Applications: conference rooms private offices

- Viking Advanced Loop Detector loop detect board for ring and line "in use" contact closures- Provide a contact closure during ringing and/or off-hook- Monitors an analog phone line for ringing or an off hook condition- A built-in relay can be activated when either of these conditions are detected- This is ideal for monitoring line status or for providing a visual indication of such- Disable input is ideal for two-button emergency phones such as Viking's E-1600-20A allowing "Info" button calls to be placed without activating the relay (turning on the emergency strobe light camera etc.)- 3 DIP switches are provided for turning ring detection on or off off-hook loop detection on or off and for selecting a ring cadence mode which allows the relay to follow ringing or to remain activated during the off time of standard ring cadence- Complete with a 12 VDC power adapter- Can also provide switched 12VDC .35 Amp output to power external lights etc. during ringing and/or off-hook conditions- Applications: control a strobe or beacon light for ring indication provide relay closures on off-hook trigger a security camera trigger a tape recorder phone "in use" indicator- Detects ring voltage and off hook loop current- On/off switches for ring detection and off hook/loop detection- Screw terminal connections- Selectable ring cadence mode (relay can remain on between rings)- Wall mountable with foam tape (included) or screws (not included)- Switched 12V DC output (follows relay activation for powering strobe lights cameras etc.)- One set of (NO) normally open and (NC) normally closed relay contacts provided- Disable input ideal for use with two-button emergency phones (E-1600-20A) will not activate relay on "Info" calls- Made in the USA- 1 Year manufacturer's warranty- Power: 120V AC to 12V DC adapter provided- VKLDB3

- Self diagnostic reports via email (testing com mic speaker and switch)- Automatic polling and programming software included- SIP compatible (see page 2 for list of compatible IP-PBX phone systems)- PoE powered (class 1