Showing 60–70 of 375 results

Built-in 125KHz 26-bit Wiegand proximity card reader with LED beep card read confirmation and EWP board protectionCompatible with the following Viking Proximity Cards and Fobs: PRX-C PRX-C-ISO and PRX-FOB (DOD# 198)Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics heavy duty metal keypad and T-10 Torx Security mounting screws.Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Internally sealed keypad. Mylar speaker. Self-draining mic mount. Faceplate keypad mic and speaker gaskets.Designed to meet IP66 Ingress Protection Rating (see DOD 859)Operates on 12 to 24 volts AC/DC12 speed dial buttons (22 digits each)12 alternate number positions (22 digits each)One button operation (no call button)Hang up on CPC busy silence time-out or dial toneTouch tone restriction from microphoneIntegral relays for camera control and door strikeWorks with C-1000B for increased securityWorks with C-3000 for �No CO� (phone line) operation50 keyless entry codesSee model K-1205 for integral cameraPostal lock input

- Viking Advanced Loop Detector loop detect board for ring and line "in use" contact closures- Provide a contact closure during ringing and/or off-hook- Monitors an analog phone line for ringing or an off hook condition- A built-in relay can be activated when either of these conditions are detected- This is ideal for monitoring line status or for providing a visual indication of such- Disable input is ideal for two-button emergency phones such as Viking's E-1600-20A allowing "Info" button calls to be placed without activating the relay (turning on the emergency strobe light camera etc.)- 3 DIP switches are provided for turning ring detection on or off off-hook loop detection on or off and for selecting a ring cadence mode which allows the relay to follow ringing or to remain activated during the off time of standard ring cadence- Complete with a 12 VDC power adapter- Can also provide switched 12VDC .35 Amp output to power external lights etc. during ringing and/or off-hook conditions- Applications: control a strobe or beacon light for ring indication provide relay closures on off-hook trigger a security camera trigger a tape recorder phone "in use" indicator- Detects ring voltage and off hook loop current- On/off switches for ring detection and off hook/loop detection- Screw terminal connections- Selectable ring cadence mode (relay can remain on between rings)- Wall mountable with foam tape (included) or screws (not included)- Switched 12V DC output (follows relay activation for powering strobe lights cameras etc.)- One set of (NO) normally open and (NC) normally closed relay contacts provided- Disable input ideal for use with two-button emergency phones (E-1600-20A) will not activate relay on "Info" calls- Made in the USA- 1 Year manufacturer's warranty- Power: 120V AC to 12V DC adapter provided- VKLDB3

- Vandal Resistant Features:- 12 gauge (0.105" thick) 316 stainless steel front panel- Permanent laser etched graphics- Metal handset cradle- Armored handset cable with internal stainless steel lanyard- Hex drive mounting screws- Weather Resistant Features:- Marine grade 316 stainless steel faceplate- Marine grade 316 stainless steel hex drive screws- Equipped with Enhanced Weather Protection (EWP)- Gaskets (on EWP models)- Auto dials one programmable speed dial number (up to 32 digits)- Touch tone or pulse dialing- Non-volatile memory (no batteries required)- Operates on analog PABX and key system extensions or analog Centrex and CO lines- Programmable 6 digit security code- Touch tone programmable- 12� armored handset cable with internal stainless steel lanyard for added strength and vandal resistance- Programmable pre-dial pause- Blocks fraudulent calls from hand held pocket dialers- Hearing aid compatible amplified handset with sealed ��push button volume control- Programmable default volume level- Programmable volume control disable- Equipped with Enhanced Weather Protection (EWP) � EWP products are designed to meet IP66 Ingress Protection Rating see DOD 859- Flush mount using a standard double-gang box (not included)- Surface mount using an optional VE-5�10 surface mount box (not included see DOD 424)

- EWP products feature foam rubber gaskets and boots sealed connections gel-filled butt connectors as well as urethane or thermal plastic potted circuit boards- Self diagnostic reports via email (testing com mic speaker & switch)- Automatic polling and programming software included- 2 Amp relay contacts for door/gate or SL-2 strobe light control- SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)- PoE powered (class 1

Built-in high resolution color video camera with wide viewing tilt/swivel adjustments and wide operating temperature of -30� F to 150� F Audio and video transmission on one CAT5E cable (see page 5)Compact size: Front panel is the size of a typical single gang midsize wall plateMounting: Flush mount in a single gang electrical box (2.25� deep x 2.00� wide x 2.84� tall min) electrical box or surface mount in a Viking model VE-3x5 (not included - see Fax Back Document 424)Available in 5 standard faceplate finishes: Brushed Stainless Steel Oil Rubbed Bronze Polished Brass Satin White and Satin BlackPNL-50 faceplates: Replacement faceplates with matching screws available in all five standard finishesWeather Resistant Features: Mylar speaker faceplate gasket mic and speaker gasket internally sealed (IP67) push button switch sealed camera lens potted camera circuit board stainless steel phone and camera mounting hardware and UV stable weather resistant powder coating (excluding E-50-SS )Optional Enhanced Weather Protection (EWP) availableVandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate stainless steel push button stainless steel speaker screen scratch resistant powder coating impact and scratch resistant camera lens and hex drive mounting screwsMicrophone and speaker volume controlsProgrammable Intelligent call progress detection for automatic hang-up on CPC silence busy signal or time outSelectable auto answer feature for monitoringProgrammable VOX (mic/speaker) switching speedBlue LED helps located push button indicate ringing and off-hook

EWP products feature foam rubber gaskets and boots sealed connections gel-filled butt connectors as well as urethane or thermal plastic potted circuit boardsBuilt-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protectionVandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate mic and speaker gaskets.Two sets of SPDT 2 Amp relay contacts for door/gate or camera controlOptional RC-4A for Secure Remote Relay Control see DOD# 582Blue �Call /Status� LED indicatorSIP compliant (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 2

- Programmable as a single number hot-line dialer or a multi-number dialer- Stores up to 100 32-digit phone numbers- Non-volatile E2 memory (no batteries required)- Local or remote programmable with a standard Touch Tone phone- AC power allows installation on nearly any analog line- Touch Tone dialing with normal or high speed settings- Increased toll restriction (programmable on/off)- Ring thru mode allows you to call the phone connected to the dialer- LED status indicator- Push button security code override- Allows 911 dialing- Single number alarm dialer mode- Programmable call timer

- Compact: Front panel is the size of a typical double gang mid-size wall plate- Mounting: Flush mounts in a double gang electrical box (2.25� deepx 3.65� wide x 2.84� tall minimum) or surface mounts in a Viking VE-5x5 (not included see DOD# 424) for mounting to a wall post or VE-GNP Gooseneck Pedestal (EWP recommended)- Available in 4 standard faceplate finishes: Brushed Stainless Steel Oil Rubbed Bronze Textured Black and Satin White- PNL-60 faceplates: Replacement faceplates with matching screws available in all four standard finishes- Self diagnostic reports via email (testing com mic speaker & switch)- Automatic polling and programming software included- 2 Amp relay contacts for door/gate or SL-2 strobe light control- Blue LED indicator- SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)- Outbound Proxy Authentication ID Peer to Peer VLAN Tagging- PoE powered (class 1

- Viking Electronics entry phone- Compact size: Front panel is the size of a typical double gang mid- size wall plat- Flush mounts in a double gang electrical box (2.25� deep x 3.7� wide x 2.84� tall minimum)- PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes- Weather Resistant Features: Mylar speaker faceplate gasket mic and speaker gasket internally sealed (IP67) push button switch self draining mic mount and UV stable weather resistant powder coating - Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate stainless steel push button stainless steel speaker screen scratch resistant powder coating hex drive mounting screws- Blue LED helps locate the push button indicate ringing and off-hook- Telephone line powered- Microphone and speaker volume controls- Programmable Intelligent call progress detection for automatic hang-up on CPC silence busy signal or time out- Selectable auto answer feature for monitoring- Programmable VOX (mic/speaker) switching speed- BronzeVKE60BN

Analog Emergency Line Sharing Device for IP PBXs/VoIP Phone Systems Shares FXO port with another analog device and seizes the line in the event of a 911 call Maintains the availability of the line in the event the emergency call is disconnected so 911 personnel can call back to reestablish the connection Routes both incoming and outgoing calls Gives priority to emergency devices Incoming calls routed to one of two ports by distinctive ring or quick callback Status LED displays mode of operation Provides a busy signal to the phone port when an emergency device is in use