Showing 20–30 of 375 results

Self diagnostic reports via email (testing com mic speaker & switch)Automatic polling and programming software included2 Amp relay contacts for door/gate or SL-2 strobe light controlSIP compatible (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 1

- Viking lock and key set for VE-series phone boxes

- Alternate action call button to place or cancel a call- Intelligent call progress detection for automatic hang-up on CPC silence busy signal or time out- Telephone line powered- Weather resistant features: mylar speaker gaskets internally sealed push button switch UV stable exterior enamel coated PCB- Optional Enhanced Weather Protection (EWP) available for greater weather resistance- Adjustable microphone and speaker volume- Programmable maximum call length- Selectable auto-answer feature allows remote monitoring- Two way handsfree communication- Programmable VOX (mic/speaker) switching speed- Light gray colored impact resistant U.V. stable plastic chassis- Surface mountable only

Meets ADA requirements for Emergency Phones: -Can automatically light the "Call Connected" LED for the hearing impaired -Transmits a unique location I.D. code or voice announcement -Grade 2 Braille label for the visually impairedNon-volatile digital voice announcer with 16 seconds of voice memoryAdvanced call progress detectionHandsfree operationPhone line poweredNon-volatile memory (no batteries required)Marine grade 316 stainless steel prevents corrosion on stainless modelsDials up to 5 emergency numbersE-1600-20A and E-1600-52A dial up to 3 non-emergency �INFO� numbersCycles through backup emergency and non-emergency numbers on busy or no-answerOptional Enhanced Weather Protection (EWP) EWP products are designed to meet IP66 Ingress Protection Rating see DOD# 859Hangs up on CPC silence busy signal dial tone time-out or touch tone commandProgrammable to auto-answer on incoming callsRemotely programmableExtended temperature range (-15�F to 130�F)9 different chassis or board only available

Built-in high resolution analog NTSC color video camera with wide viewing angle tilt/swivel adjustments and wide operating temperature: -40�F to 140�FBuilt-in 125KHz 26-bit Wiegand proximity card reader with LED beep card read confirmation and EWP board protectionCompatible with the following Viking Proximity Cards and Fobs: PRXC PRX-C-ISO PRX-FOB and LRT-4 (DOD# 198 & 226)Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics heavy duty metal keypad and T-10 Torx security mounting screws.Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Internally sealed keypad. Mylar speaker. Selfdraining mic mount. Faceplate keypad mic and speaker gaskets.Designed to meet IP66 Ingress Protection Rating (see DOD 859)Operates on 12 to 24 volts AC/DC12 speed dial buttons (22 digits each)12 alternate number positions (22 digits each)One button operation (no call button)Hang up on CPC busy silence time-out or dial toneTouch tone restriction from microphoneIntegral relays for camera control and door strikeWorks with C-1000B for increased securityWorks with C-3000 for �No CO� (phone line) operation50 keyless entry codesPostal lock input

- EWP products feature foam rubber gaskets and boots sealed connections gel-filled butt connectors as well as urethane or thermal plastic potted circuit boards- Self diagnostic reports via email (testing com mic speaker & switch)- Automatic polling and programming software included- 2 Amp relay contacts for door/gate or SL-2 strobe light control- SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)- PoE powered (class 1

-12 Minutes of Flash message memory- Up to 8 different messages (Day Night 5 menu messages and Goodbye)- Local and Remote programming/message recording using a standard Touch Tone phone- Optional audio input jack for recording from an external source (Tape CD PC etc.)- Programmable 4 digit code to bypass greeting and Ring through- Programmable Store and Forward Caller ID- Distinctive Ring Transfer with 4 ring patterns- Programmable Automatic ring through after greeting- Call progress detection for automatic hang-up on CPC busy signal or time out- Music On Hold input- 90V Message Playing signal for visual indication- Message and MOH volume controls- Programmable Ring Delay Maximum Ring Count Maximum On-Hold Time and Max Message playback time- Surge protection for power and phone line

- Ringing Phone or TTY indication for the hearing impaired- Ringing phone indication in loud warehouses and factories- Emergency illumination for emergency phones in elevators campuses hallways parking ramps etc.- Alarm indication for security systems or alarm panels with phone dialers - Durable polycarbonate lens- High output long life LED technology- Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash- 6 programmable beacon and strobe brightness settings- Immune to shock and vibration- Flush mount or surface mount with weatherproof single gang box (included)- 3/4� knockouts for connecting conduit etc.- Strobe and control module may be installed separately- Can be configured to signal: ringing off-hook a combination of both ringing and off-hook (line in-use) or triggered from a contact closure- One set of (NO) normally open and (NC) normally closed relay contacts provided- Selectable ring cadence mode (strobe light will remain flashing between rings)- Switched 12V DC output (follows relay activation for powering strobe lights cameras etc.)- On/off switches for ring detection and off-hook/loop detection- Disable input ideal for use with two-button emergency phones like Viking�s E-1600-20A (DOD# 215) will not activate strobe light on �Info� calls - Power: 120V AC to 12V DC adapter provided- Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft 2 pair = 225 ft 3 pair = 325 ft 4 pair = 475 ft- Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft 6 wires = 300 ft- Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")- Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1" x 1.0�)- Shipping Weight: 1.5 kg (3.3 lbs)- Operating Temperature: -26� to 54�C (-15� to 130� F)- Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC- Minimum Loop Current: 15 mA- Minimum Ring Voltage: 25V RMS- Ringer Equivalence: 0.5 A REN- Disable/Info Switch Input: 50mA/80mW maximum- Humidity - BLK-4: 5% to 95% non-condensing- Mounting: Fasten to wall post etc. with complete surface mounting hardware included- Connections: Color coded wires with gel-filled butt connectors

EWP products feature foam rubber gaskets and boots sealed connections gel-filled butt connectors as well as urethane or thermal plastic potted circuit boardsBuilt-in high resolution analog NTSC color video camera with wide viewing angle tilt/swivel adjustments and wide operating temperature: -40�F to 140�FVandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate mic and speaker gaskets.Two sets of SPDT 2 Amp relay contacts for door/gate or camera controlOptional RC-4A for Secure Remote Relay Control see DOD# 582Blue �Call /Status� LED indicatorSIP compliant (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 2

Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate mic and speaker gaskets.Two sets of SPDT 2 Amp relay contacts for door/gate or camera controlOptional RC-4A for Secure Remote Relay Control see DOD# 582Blue �Call /Status� LED indicatorSIP compliant (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 2