- Alternate action call button to place or cancel a call- Intelligent call progress detection for automatic hang-up on CPC silence busy signal or time out- Telephone line powered- Weather resistant features: mylar speaker gaskets internally sealed push button switch UV stable exterior enamel coated PCB- Optional Enhanced Weather Protection (EWP) available for greater weather resistance- Adjustable microphone and speaker volume- Programmable maximum call length- Selectable auto-answer feature allows remote monitoring- Two way handsfree communication- Programmable VOX (mic/speaker) switching speed- Light gray colored impact resistant U.V. stable plastic chassis- Surface mountable only
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate mic and speaker gaskets.Two sets of SPDT 2 Amp relay contacts for door/gate or camera controlOptional RC-4A for Secure Remote Relay Control see DOD# 582Blue �Call /Status� LED indicatorSIP compliant (see pg 2 for list of compatible IP-PBX phone systems)PoE powered (class 2
- Vandal Resistant Features:- 12 gauge (0.105" thick) 316 stainless steel panel with permanent laser etched graphics- Armored handset cable- Metal cradle- Heavy duty metal keypad- Hex drive mounting screws- Weather Resistant Features:- Marine grade 316 stainless steel faceplate- Marine grade 316 stainless steel screws- Internally sealed keypad- Auto dials one programmable speed dial number (up to 32 digits)- Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)- Touch tone or pulse dialing- Non-volatile memory no batteries required- Operates on analog PABX and key system extensions or analog Centrex and CO lines- Programmable 6 digit security code- Touch tone programmable- Armored 12" handset cable with an internal stainless steel lanyard for additional cable strength- Programmable pre-dial pause- Blocks fraudulent calls from hand held pocket dialers- Limited toll restriction in standard touch tone phone mode- Hearing aid compatible amplified handset with sealed push button volume control- Programmable default volume level- Programmable volume control disable- Zinc plated steel rough-in box with (2) 0.75" conduit knockouts included- Flush mount using the included rough-in box or surface mount using a Viking VE-5�10 surface mount box (not included DOD 424)
- EWP products feature foam rubber gaskets and boots sealed connections gel-filled butt connectors as well as urethane or thermal plastic potted circuit boards- Self diagnostic reports via email (testing com mic speaker & switch)- Automatic polling and programming software included- 2 Amp relay contacts for door/gate or SL-2 strobe light control- SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)- PoE powered (class 1
Automatic polling and programming software included2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)Red �Call Connected� LED indicatorSIP compliant (see Product Manual for list of compatible IP-PBX phone systems)PoE powered (class 1
-12 Minutes of Flash message memory- Up to 8 different messages (Day Night 5 menu messages and Goodbye)- Local and Remote programming/message recording using a standard Touch Tone phone- Optional audio input jack for recording from an external source (Tape CD PC etc.)- Programmable 4 digit code to bypass greeting and Ring through- Programmable Store and Forward Caller ID- Distinctive Ring Transfer with 4 ring patterns- Programmable Automatic ring through after greeting- Call progress detection for automatic hang-up on CPC busy signal or time out- Music On Hold input- 90V Message Playing signal for visual indication- Message and MOH volume controls- Programmable Ring Delay Maximum Ring Count Maximum On-Hold Time and Max Message playback time- Surge protection for power and phone line
- New high output speaker amplifier with volume adjustment POT- Microphone volume adjustment POT- 24V talk battery- 20Hz ring generator (3.0 REN ring load maximum)- Selectable number of rings (2 3 10 or 30)- Extended operating temperature range: -15 degrees F to 130 degrees F- Compact 45 degree terminal strip for easy wiring- Optional Enhanced Weather Protection (VK-W-1000-EWP)
- Powerful 70V amplifier drives up to 250 Watt load- Line input allows connection to any analog line level output such as: telephone system paging port paging mixer etc.- Volume control- Input Level control- Bass and treble controls- Power and volume LEDs
Built-in 125KHz 26-bit Wiegand proximity card reader with LED beep card read confirmation and EWP board protectionCompatible with the following Viking Proximity Cards and Fobs: PRX-C PRX-C-ISO and PRX-FOB (DOD# 198)Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics heavy duty metal keypad and T-10 Torx Security mounting screws.Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Internally sealed keypad. Mylar speaker. Self-draining mic mount. Faceplate keypad mic and speaker gaskets.Designed to meet IP66 Ingress Protection Rating (see DOD 859)Operates on 12 to 24 volts AC/DC12 speed dial buttons (22 digits each)12 alternate number positions (22 digits each)One button operation (no call button)Hang up on CPC busy silence time-out or dial toneTouch tone restriction from microphoneIntegral relays for camera control and door strikeWorks with C-1000B for increased securityWorks with C-3000 for �No CO� (phone line) operation50 keyless entry codesSee model K-1205 for integral cameraPostal lock input
- Viking Electronics entry phone- Compact size: Front panel is the size of a typical double gang mid- size wall plat- Flush mounts in a double gang electrical box (2.25� deep x 3.7� wide x 2.84� tall minimum)- PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes- Weather Resistant Features: Mylar speaker faceplate gasket mic and speaker gasket internally sealed (IP67) push button switch self draining mic mount and UV stable weather resistant powder coating - Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate stainless steel push button stainless steel speaker screen scratch resistant powder coating hex drive mounting screws- Blue LED helps locate the push button indicate ringing and off-hook- Telephone line powered- Microphone and speaker volume controls- Programmable Intelligent call progress detection for automatic hang-up on CPC silence busy signal or time out- Selectable auto answer feature for monitoring- Programmable VOX (mic/speaker) switching speed- BronzeVKE60BN
Note: Search results and information may differ as they are provided by a third party.
In Stock*: Product stock is updated from the last business day and can change.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
